Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 1.5 g/cm³ Show Supplier Material materials with Dichte of 1.5 g/cm³ | ISO 1183 |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Biegefestigkeit | 23.0 °C | 321 MPa Show Supplier Material materials with Biegefestigkeit of 321 MPa | ISO 178 |
Biegemodul | 23.0 °C | 19.8 GPa Show Supplier Material materials with Biegemodul of 19.8 GPa | ISO 178 | 2 mm/min |
Dehnung | 23.0 °C | 1 % Show Supplier Material materials with Dehnung of 1 % | ISO 527 | break, 5 mm/min |
Elastizitätsmodul | 23.0 °C | 21.6 GPa Show Supplier Material materials with Elastizitätsmodul of 21.6 GPa | ISO 527 | 1 mm/min |
Schlagzähigkeit, Izod gekerbt | 23.0 °C | 9 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 9 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Schlagzähigkeit, Izod ungekerbt | 23.0 °C | 40 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod ungekerbt of 40 kJ/m² | ISO 180/1U | unnotched 80*10*4, 23°C |
Zugfestigkeit | 23.0 °C | 224 MPa Show Supplier Material materials with Zugfestigkeit of 224 MPa | ISO 527 | break, 5 mm/min |
Thermisch
Property | Temperature | Value | Comment |
---|---|---|---|
Koeffizient der thermischen Ausdehnung | 23.0 °C | 8.4E-6 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 8.4E-6 1/K | ISO 11359-2 | 23°C to 60°C |
thermischer Ausdehnungskoeffizient, transversal | 23.0 °C | 4.2E-5 1/K Show Supplier Material materials with thermischer Ausdehnungskoeffizient, transversal of 4.2E-5 1/K | ISO 11359-2 | 23°C to 60°C |
Technological properties
Property | ||
---|---|---|
Application areas | Engine Component | |
Availability | Europe,Americas | |
Processing methods | Maximum Moisture Content: 0.1% | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |