NORYL GTX™ Resin GTX918W - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Anwendungen

Elektrotechnik

Automobil

Allgemeine Fahrzeugteile

Automotive Interior

Bau

Water Management

Konsumgüter

Haushaltselektrogeräte

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	85 MPa Show Supplier Material materials with Biegefestigkeit of 85 MPa	ISO 178 \| yield, 2 mm/min
Biegemodul	23.0 °C	2.2 GPa Show Supplier Material materials with Biegemodul of 2.2 GPa	ISO 178 \| 2 mm/min
Dehnung	23.0 °C	30 % Show Supplier Material materials with Dehnung of 30 %	ISO 527 \| break, 50 mm/min
Schlagzähigkeit, Izod gekerbt	23.0 °C	20 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 20 kJ/m²	ISO 180/1A \| 80104, 23°C
Zugfestigkeit	23.0 °C	55 MPa Show Supplier Material materials with Zugfestigkeit of 55 MPa	ISO 527 \| break, 50 mm/min

Thermisch

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	185 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 185 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Wärmeformbeständigkeitstemperatur	185 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 185 °C

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	1.3 % Show Supplier Material materials with Schrumpfung of 1.3 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Electronic Components, Console, Cooking Range, Auto Electrical, Circuit Protection, Meter Gas
Availability	Europe,Asia,Americas
Processing methods	Melt Temperature: 280 to 310.0°C Middle - Zone 2 Temperature: 270 to 290.0°C Drying Temperature: 100 to 120.0°C Drying Time: 2 to 3.0hrs Hopper Temperature: 60 to 80.0°C Maximum Moisture Content: 0.07% Nozzle Temperature: 270 to 300.0°C Front - Zone 3 Temperature: 280 to 300.0°C Rear - Zone 1 Temperature: 260 to 280.0°C Mold Temperature: 80 to 120.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.