LNP™ THERMOCOMP™ Compound ZF006 - Americas

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP ZF006 is a compound based on PPO resin containing 30% Glass Fiber.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.31 g/cm³ Show Supplier Material materials with Dichte of 1.31 g/cm³	ASTM D 792

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	161 MPa Show Supplier Material materials with Biegefestigkeit of 161 MPa	ASTM D 790 \| brk, 1.3 mm/min, 50 mm span
Biegemodul	23.0 °C	8.9 GPa Show Supplier Material materials with Biegemodul of 8.9 GPa	ASTM D 790
Schlagzähigkeit, Izod gekerbt	23.0 °C	114 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 114 kJ/m²	ASTM D 256 \| notched, 23°C

Thermisch

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	135 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 135 °C	ASTM D 648 \| 3.2mm, unannealed
Wärmeformbeständigkeitstemperatur	135 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 135 °C

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.3 % Show Supplier Material materials with Schrumpfung of 0.3 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Availability	Europe,Asia,Americas
Processing methods	Screw Speed: 30 to 60.0rpm Melt Temperature: 300 to 305.0°C Rear - Zone 1 Temperature: 275 to 290.0°C Front - Zone 3 Temperature: 300 to 310.0°C Drying Time: 4hrs Back Pressure: 0.2 to 0.3MPa Middle - Zone 2 Temperature: 290 to 300.0°C Drying Temperature: 120°C Mold Temperature: 80 to 110.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.