LNP™ LUBRICOMP™ Compound YL003 - Americas

Want to keep this datasheet? Save it now in your required format

Description

LNP* LUBRICOMP* YL003 is a compound based on Polyester Elastomer resin containing 15% PTFE. Added feature of this grade is: Wear Resistant.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.27 g/cm³ Show Supplier Material materials with Dichte of 1.27 g/cm³	ASTM D 792

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23.0 °C	0.2 GPa Show Supplier Material materials with Biegemodul of 0.2 GPa	ISO 178 \| 2 mm/min
Dehnung	23.0 °C	455 % Show Supplier Material materials with Dehnung of 455 %	ISO 527 \| break, 50 mm/min
Elastizitätsmodul	23.0 °C	0.2 GPa Show Supplier Material materials with Elastizitätsmodul of 0.2 GPa	ISO 527 \| 1 mm/min
Schlagzähigkeit, Izod gekerbt	23.0 °C	21 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 21 kJ/m²	ISO 180/1A \| notched 80104, 23°C
Zugfestigkeit	23.0 °C	24 MPa Show Supplier Material materials with Zugfestigkeit of 24 MPa	ISO 527 \| yield, 50 mm/min
Schlagzähigkeit, Izod ungekerbt	ISO 180/1U \| 80104, 23°C

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	1 % Show Supplier Material materials with Schrumpfung of 1 %	ASTM D 955 \| 24 hrs
Schrumpfung, diagonal	23.0 °C	1 % Show Supplier Material materials with Schrumpfung, diagonal of 1 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Availability	Europe,Americas
Processing methods	Drying Temperature: 80°C Maximum Moisture Content: 0.1% Drying Time: 4hrs Mold Temperature: 25 to 55.0°C Back Pressure: 0.2 to 0.3MPa Melt Temperature: 215 to 240.0°C Front - Zone 3 Temperature: 225 to 240.0°C Middle - Zone 2 Temperature: 205 to 215.0°C Screw Speed: 30 to 60.0rpm Rear - Zone 1 Temperature: 180 to 195.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.