ULTEM™ Resin AR9300 - Europe

Want to keep this datasheet? Save it now in your required format

Description

30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Anwendungen

Herstellung

Additive Fertigung

Eisenbahn

Luft- und Raumfahrt

Materialien für Luft- und Raumfahrt

Aircraft Interiors

Verteidigung

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	225 MPa Show Supplier Material materials with Biegefestigkeit of 225 MPa	ISO 178 \| yield, 2 mm/min
Biegemodul	23.0 °C	8.5 GPa Show Supplier Material materials with Biegemodul of 8.5 GPa	ISO 178 \| 2 mm/min
Dehnung	23.0 °C	2 % Show Supplier Material materials with Dehnung of 2 %	ISO 527 \| break, 5 mm/min
Elastizitätsmodul	23.0 °C	9.5 GPa Show Supplier Material materials with Elastizitätsmodul of 9.5 GPa	ISO 527 \| 1 mm/min
Zugfestigkeit	23.0 °C	165 MPa Show Supplier Material materials with Zugfestigkeit of 165 MPa	ISO 527 \| break, 5 mm/min

Thermisch

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	208 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 208 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Wärmeformbeständigkeitstemperatur	208 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 208 °C
Entflammbarkeit	OSU peak heat release rate (5 minute test): 40kW/m² FAR 25.853

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.2 % Show Supplier Material materials with Schrumpfung of 0.2 %	SABIC method \| on tensile bar

Technological properties

Property
Application areas	Enclosure/Housing/Cover, Air Cabin Interiors, Aircraft Seating, Aerospace
Availability	Europe,Asia,Americas
Processing methods	Drying Time: 4 to 6.0hrs Maximum Moisture Content: 0.02% Melt Temperature: 350 to 400.0°C Drying Temperature: 150°C Front - Zone 3 Temperature: 350 to 410.0°C Nozzle Temperature: 350 to 410.0°C Hopper Temperature: 80 to 120.0°C Rear - Zone 1 Temperature: 350 to 370.0°C Middle - Zone 2 Temperature: 350 to 400.0°C Mold Temperature: 135 to 140.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.