Eigenschaften
Allgemein
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Creep strength 10^4 cycles | 550.0 °C | 195 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 195 MPa | ISO values, at 10000h |
575.0 °C | 147 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 147 MPa | ISO values, at 10000h | |
600.0 °C | 122 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 122 MPa | ISO values, at 10000h | |
625.0 °C | 100 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 100 MPa | ISO values, at 10000h | |
650.0 °C | 79 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 79 MPa | ISO values, at 10000h | |
675.0 °C | 64 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 64 MPa | ISO values, at 10000h | |
700.0 °C | 48 MPa Show Supplier Material materials with Creep strength 10^4 cycles of 48 MPa | ISO values, at 10000h | |
Creep strength 10^5 cycles | 550.0 °C | 115 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 115 MPa | ISO values, at 100000h |
575.0 °C | 93 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 93 MPa | ISO values, at 100000h | |
600.0 °C | 74 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 74 MPa | ISO values, at 100000h | |
625.0 °C | 58 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 58 MPa | ISO values, at 100000h | |
650.0 °C | 45 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 45 MPa | ISO values, at 100000h | |
675.0 °C | 33 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 33 MPa | ISO values, at 100000h | |
700.0 °C | 23 MPa Show Supplier Material materials with Creep strength 10^5 cycles of 23 MPa | ISO values, at 100000h | |
Dehnung | 23.0 °C | 45 % Show Supplier Material materials with Dehnung of 45 % | min. |
Elastizitätsmodul | 20.0 °C | 200 GPa Show Supplier Material materials with Elastizitätsmodul of 200 GPa | |
100.0 °C | 194 GPa Show Supplier Material materials with Elastizitätsmodul of 194 GPa | ||
200.0 °C | 186 GPa Show Supplier Material materials with Elastizitätsmodul of 186 GPa | ||
300.0 °C | 179 GPa Show Supplier Material materials with Elastizitätsmodul of 179 GPa | ||
400.0 °C | 172 GPa Show Supplier Material materials with Elastizitätsmodul of 172 GPa | ||
500.0 °C | 165 GPa Show Supplier Material materials with Elastizitätsmodul of 165 GPa | ||
Härte, Vickers | 23.0 °C | 155 [-] Show Supplier Material materials with Härte, Vickers of 155 [-] | |
Kerbschlagenergie | -196.0 °C | 60 J Show Supplier Material materials with Kerbschlagenergie of 60 J | EN 13445-2 (UFPV-2) and EN 10216-5 |
Streckgrenze Rp 0,2 | 20.0 °C | 210 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 210 MPa | min. |
50.0 °C | 190 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 190 MPa | min. | |
100.0 °C | 165 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 165 MPa | min. | |
150.0 °C | 150 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 150 MPa | min. | |
200.0 °C | 140 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 140 MPa | min. | |
250.0 °C | 130 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 130 MPa | min. | |
300.0 °C | 125 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 125 MPa | min. | |
350.0 °C | 120 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 120 MPa | min. | |
400.0 °C | 115 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 115 MPa | min. | |
450.0 °C | 110 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 110 MPa | min. | |
500.0 °C | 105 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 105 MPa | min. | |
550.0 °C | 100 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 100 MPa | min. | |
600.0 °C | 95 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 95 MPa | min. | |
Streckgrenze Rp0,1 | 20.0 °C | 240 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 240 MPa | min. |
50.0 °C | 215 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 215 MPa | min. | |
100.0 °C | 190 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 190 MPa | min. | |
150.0 °C | 175 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 175 MPa | min. | |
200.0 °C | 165 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 165 MPa | min. | |
250.0 °C | 155 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 155 MPa | min. | |
300.0 °C | 150 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 150 MPa | min. | |
350.0 °C | 145 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 145 MPa | min. | |
400.0 °C | 140 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 140 MPa | min. | |
450.0 °C | 135 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 135 MPa | min. | |
500.0 °C | 130 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 130 MPa | min. | |
550.0 °C | 125 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 125 MPa | min. | |
600.0 °C | 120 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 120 MPa | min. | |
Verlängerung A2 | 23.0 °C | 35 % Show Supplier Material materials with Verlängerung A2 of 35 % | min. |
Zugfestigkeit | 23.0 °C | 515 - 690 MPa Show Supplier Material materials with Zugfestigkeit of 515 - 690 MPa | |
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 100.0 °C | 1.65E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.65E-5 1/K | for 30°C to the mentioned temperature |
200.0 °C | 1.7E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.7E-5 1/K | for 30°C to the mentioned temperature | |
300.0 °C | 1.75E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 1/K | for 30°C to the mentioned temperature | |
400.0 °C | 1.8E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.8E-5 1/K | for 30°C to the mentioned temperature | |
500.0 °C | 1.85E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.85E-5 1/K | for 30°C to the mentioned temperature | |
600.0 °C | 1.85E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.85E-5 1/K | for 30°C to the mentioned temperature | |
700.0 °C | 1.9E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.9E-5 1/K | for 30°C to the mentioned temperature | |
Spezifische Wärmekapazität | 20.0 °C | 485 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 485 J/(kg·K) | |
100.0 °C | 500 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 500 J/(kg·K) | ||
200.0 °C | 515 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 515 J/(kg·K) | ||
300.0 °C | 525 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 525 J/(kg·K) | ||
400.0 °C | 540 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 540 J/(kg·K) | ||
500.0 °C | 555 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 555 J/(kg·K) | ||
600.0 °C | 575 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 575 J/(kg·K) | ||
Wärmeleitfähigkeit | 20.0 °C | 14 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 14 W/(m·K) | |
100.0 °C | 15 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 15 W/(m·K) | ||
200.0 °C | 17 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 17 W/(m·K) | ||
300.0 °C | 18 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 18 W/(m·K) | ||
400.0 °C | 20 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 20 W/(m·K) | ||
500.0 °C | 21 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 21 W/(m·K) | ||
600.0 °C | 23 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 23 W/(m·K) | ||
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Chrom | 18.5 % Show Supplier Material materials with Chrom of 18.5 % | ||
Eisen | Balance | ||
Kohlenstoff | 0.04 % Show Supplier Material materials with Kohlenstoff of 0.04 % | min. | |
Mangan | 1.3 % Show Supplier Material materials with Mangan of 1.3 % | ||
Nickel | 9.5 % Show Supplier Material materials with Nickel of 9.5 % | ||
Phosphor | 0.04 % Show Supplier Material materials with Phosphor of 0.04 % | max. | |
Schwefel | 0.015 % Show Supplier Material materials with Schwefel of 0.015 % | max | |
Silizium | 0.4 % Show Supplier Material materials with Silizium of 0.4 % | ||
Technological properties
| Property | ||
|---|---|---|
| Application areas | Sandvik 5R10 is used for a wide range of industrial applications with emphasis on high temperature processes. Typical examples are: heat exchangers, condensers, pipelines, cooling and heating coils in the chemical, petrochemical, fertilizer, pulp and paper and nuclear power industries, as well as in the production of pharmaceuticals, foods and beverages. | |
| Certifications | Approvals: JIS Approval for Stainless Steel Tubes | |
| Cold Forming | Annealing after cold bending is not normally necessary, but this point must be decided with regard to the degree of bending and the operating conditions. Heat treatment, if any, should take the form of stress relieving or solution annealing, see under "Heat treatment". | |
| Corrosion properties | General corrosion: Sandvik 5R10 has good resistance in The risk of general corrosion in sulfuric acid during shut down periods has to be taken into account. Since Sandvik 5R10 is not alloyed with molybdenum, the grade can only tolerate low concentrations at limited temperatures. In naturally aerated sulfuric acid the corrosion rate is below 0.1 mm/year provided the temperature is not higher than 20°C (68oF) in 5% solution. Intergranular corrosion: Sandvik 5R10 has a relatively high carbon content. Thus, there is a certain risk of reduced intergranular corrosion resistance if the steel has become sensitized after e.g. improper heat treatment or welding. Sandvik 3R12 has a significantly lower carbon content and is therefore more safe regarding intergranular attack. Pitting and crevice corrosion: The steel may be sensitive to pitting and crevice corrosion even in solutions of relatively low chloride content. Molybdenum alloyed steels have better resistance and the resistance improves with increasing molybdenum content. Stress corrosion cracking: Austenitic steel is susceptible to stress corrosion cracking. This may occur at temperatures above about 60°C (140°F) if the steel is subjected to tensile stresses and at the same time comes into contact with certain solutions, particularly those containing chlorides. Such service conditions should therefore be avoided. Conditions when plants are shut down must also be considered, as the condensates which are then formed can develop conditions that lead to both stress corrosion cracking and pitting. In applications demanding high resistance to stress corrosion cracking we recommend the austenitic-ferritic steel Sandvik SAF 2304. Gas corrosion: Sandvik 5R10 can be use in Creep behavior should also be taken into account when using the steel in the creep range. In flue gases containing sulfur, the corrosion resistance is reduced. In such environments the steel can be used at temperatures up to 600-750°C (1110-1380°F) depending on service conditions. Factors to consider are whether the atmosphere is oxidizing or reducing, i.e. the oxygen content, and whether impurities such as sodium and vanadium are present. | |
| Heat Treatment | The tubes are normally delivered in heat treated condition. If additional heat treatment is needed after further processing the following is recommended. Stress relieving: 850-950°C (1560-1740°F), cooling in air. Solution annealing: 1000-1100°C(1830-2010°F), rapid cooling in air or water. | |
| Hot forming | Hot bending is carried out at 1100-850°C (2010-1560°F) and should be followed by solution annealing. | |
| Other | Forms of supply: Tube and pipe are normally delivered in the solution annealed and white-pickled condition or in the bright-annealed condition. The size range can be seen from Fig. 1. U-tubes can be delivered on request. | |
| Welding | The weldability of Sandvik 5R10 is good. Welding must be carried out without preheating and subsequent heat treatment is normally not required. Suitable methods of fusion welding are manual metal-arc welding (MMA/SMAW) and gas-shielded arc welding, with the TIG/GTAW method as first choice. For Sandvik 5R10, heat input of <1.5 kJ/mm and interpass temperature of <150°C (300°F) are recommended. Recommended filler metals:
| |