DIN 1725-1 Grade 3.0525 H18

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1Mg0,5 is similarly to AlMn1 in its properties. It reaches strength up to F 25. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occure by cold forming. It is very well hot and cold formable and is suitable to the deep-drawing (no lappet formation). The alloy AlMn1Mg0,5 is very well corrosion resistant and is sea water steady. As semi-finished material it is present in accordance with DIN 1788 and DIN 1745 only as sheet metal or strip. Application: Mainly in the packing for cans (lower parts), for menu bowls, for covers. In the building industry for claddings, roofings, for sun protection facilities (roller schutter, lamella net curtain) and for roll gates as well as for flexible pipes and in the construction of vehicles.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.72 g/cm³ Show Material materials with Dichte of 2.72 g/cm³	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	2.72 g/cm³ Show Material materials with Dichte of 2.72 g/cm³	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Biegewinkel 90°		1.5 °/t Show Material materials with Biegewinkel 90° of 1.5 °/t	H18	EN 573-3, EN 485
		2.5 °/t Show Material materials with Biegewinkel 90° of 2.5 °/t	H18	EN 573-3, EN 485
Dehnung		1.0 % Show Material materials with Dehnung of 1.0 %	H18	EN 573-3, EN 485		A50
		2.0 % Show Material materials with Dehnung of 2.0 %	H18	EN 573-3, EN 485		A50
		4.0 % Show Material materials with Dehnung of 4.0 %	H18	EN 573-3, EN 1592		A100
	20.0 °C	2.0 % Show Material materials with Dehnung of 2.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip	A10
	20.0 °C	3.0 % Show Material materials with Dehnung of 3.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Elastizitätsmodul		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	65.0 GPa Show Material materials with Elastizitätsmodul of 65.0 GPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Härte, Brinell		69.0 [-] Show Material materials with Härte, Brinell of 69.0 [-]	H18	EN 573-3, EN 485
	20.0 °C	75.0 [-] Show Material materials with Härte, Brinell of 75.0 [-]	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Schubmodule	20.0 °C	26.5 Show Material materials with Schubmodule of 26.5	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Zugfestigkeit		220.0 MPa Show Material materials with Zugfestigkeit of 220.0 MPa	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	215.0 - 235.0 MPa Show Material materials with Zugfestigkeit of 215.0 - 235.0 MPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet
	20.0 °C	215.0 - 255.0 MPa Show Material materials with Zugfestigkeit of 215.0 - 255.0 MPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Strip

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape
Koeffizient der thermischen Ausdehnung	20 °C	2.3199999999999998e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3199999999999998e-05 1/K	H18	EN 573-3, EN 1592, EN 485
	100 °C	2.3199999999999998e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3199999999999998e-05 1/K	H18	EN 573-3, EN 1592, EN 485
Schmelzpunkt		630.0 - 654.0 °C Show Material materials with Schmelzpunkt of 630.0 - 654.0 °C	H18	EN 573-3, EN 1592, EN 485
Spezifische Wärmekapazität	20.0 °C	893.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 893.0 J/(kg·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Wärmeleitfähigkeit		160.0 - 190.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 160.0 - 190.0 W/(m·K)	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	200.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 200.0 W/(m·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit		23000000.0 - 25000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 23000000.0 - 25000000.0 S/m	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	28000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 28000000.0 S/m	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
spezifischer Widerstand		4e-08 - 4.35e-08 Ω·m Show Material materials with spezifischer Widerstand of 4e-08 - 4.35e-08 Ω·m	H18	EN 573-3, EN 1592, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.1 % Show Material materials with Chrom of 0.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Eisen	0.7 % Show Material materials with Eisen of 0.7 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	0.70 % Show Material materials with Eisen of 0.70 %	H18	EN 573-3, EN 1592, EN 485
Kupfer	0.3 % Show Material materials with Kupfer of 0.3 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Magnesium	0.2 - 0.6 % Show Material materials with Magnesium of 0.2 - 0.6 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Mangan	1.0 - 1.5 % Show Material materials with Mangan of 1.0 - 1.5 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Silizium	0.6 % Show Material materials with Silizium of 0.6 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Titan	0.1 % Show Material materials with Titan of 0.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Zink	0.25 % Show Material materials with Zink of 0.25 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip

Technological properties

Property

Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)