DIN 1725-1 Grade 3.3316 H18

Want to keep this datasheet? Save it now in your required format

Description

The alloys are characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. From the AlMg alloys the mark AlMg1,5 has to exhibit only relatively small mechanical properties. Standardised semi-finished material only for sheet metal and strips with thickness: > 0.35 mm in accordance to DIN 1745. Application: The main application lies in the building industry. In the building industry for lamella net curtains, rolling shutter, roll gates, in food industry (including table-ware) and for transport containers.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.68 g/cm³ Show Material materials with Dichte of 2.68 g/cm³	H18	EN 573-3, EN 485
		2.69 g/cm³ Show Material materials with Dichte of 2.69 g/cm³	H18	EN 573-3, EN 485
	20.0 °C	2.69 g/cm³ Show Material materials with Dichte of 2.69 g/cm³	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Biegewinkel 90°		1.5 °/t Show Material materials with Biegewinkel 90° of 1.5 °/t	H18	EN 573-3, EN 485
		2.5 °/t Show Material materials with Biegewinkel 90° of 2.5 °/t	H18	EN 573-3, EN 485
Dehnung		1.0 % Show Material materials with Dehnung of 1.0 %	H18	EN 573-3, EN 485		A50
		2.0 % Show Material materials with Dehnung of 2.0 %	H18	EN 573-3, EN 485		A50
	20.0 °C	2.0 % Show Material materials with Dehnung of 2.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	3.0 % Show Material materials with Dehnung of 3.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat
Elastizitätsmodul		69.0 GPa Show Material materials with Elastizitätsmodul of 69.0 GPa	H18	EN 573-3, EN 485
		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	H18	EN 573-3, EN 485
	20.0 °C	70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat
Härte, Brinell		68.0 [-] Show Material materials with Härte, Brinell of 68.0 [-]	H18	EN 573-3, EN 485
	20.0 °C	65.0 [-] Show Material materials with Härte, Brinell of 65.0 [-]	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Schubmodule	20.0 °C	26.5 Show Material materials with Schubmodule of 26.5	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat
Zugfestigkeit		220.0 MPa Show Material materials with Zugfestigkeit of 220.0 MPa	H18	EN 573-3, EN 485
	20.0 °C	225.0 MPa Show Material materials with Zugfestigkeit of 225.0 MPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	20 °C	2.38e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.38e-05 1/K	H18	EN 573-3, EN 485
	100 °C	2.38e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.38e-05 1/K	H18	EN 573-3, EN 485
Max. Betriebstemperatur		150.0 °C Show Material materials with Max. Betriebstemperatur of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Schmelzpunkt		620.0 - 650.0 °C Show Material materials with Schmelzpunkt of 620.0 - 650.0 °C	H18	EN 573-3, EN 485
		625.0 - 650.0 °C Show Material materials with Schmelzpunkt of 625.0 - 650.0 °C	H18	EN 573-3, EN 485
Spezifische Wärmekapazität		879.0 - 963.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Wärmeleitfähigkeit		170.0 - 190.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 170.0 - 190.0 W/(m·K)	H18	EN 573-3, EN 485
		193 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 193 W/(m·K)	H18	EN 573-3, EN 485
	20.0 °C	160.0 - 200.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 160.0 - 200.0 W/(m·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit		23000000.0 - 26000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 23000000.0 - 26000000.0 S/m	H18	EN 573-3, EN 485
		29000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 29000000.0 S/m	H18	EN 573-3, EN 485
	20.0 °C	28000000.0 - 30000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 28000000.0 - 30000000.0 S/m	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat
spezifischer Widerstand		3.45e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.45e-08 Ω·m	H18	EN 573-3, EN 485
		3.85e-08 - 4.35e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.85e-08 - 4.35e-08 Ω·m	H18	EN 573-3, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.1 % Show Material materials with Chrom of 0.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Eisen	0.45 % Show Material materials with Eisen of 0.45 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.45 % Show Material materials with Eisen of 0.45 %	H18	EN 573-3, EN 485
Kupfer	0.05 % Show Material materials with Kupfer of 0.05 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Magnesium	1.1 - 1.7 % Show Material materials with Magnesium of 1.1 - 1.7 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Mangan	0.15 % Show Material materials with Mangan of 0.15 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Silizium	0.4 % Show Material materials with Silizium of 0.4 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Zink	0.2 % Show Material materials with Zink of 0.2 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat

Technological properties

Property

Workability

Good workability.