DIN 1725-1 Grade 3.0615 T8

Want to keep this datasheet? Save it now in your required format

Description

The material AlMgSiPb is a free-cutting alloy (boring and turning quality). It is warm and cold hardenable. Breaking the splinter is caused by the additive of Pb, and thus a troublefree splinter removal is possible with relatively high cutting performance. From the standardised free-cutting steel alloys this has to exhibit the smallest strength grade (F20 and/or F28), is however as only without surface protection corrosion resistant. It is suitable for a decorative surface treatment such as an anodising or a dyeing. The weldability is good. Heat treatment for hardening: solution annealing: 520 to 530 °C, quenching in water to 65 °C cold ageing: 5 to 8 at ambient temperature warm ageing: 4 to 16 h at 155 to 190 °C

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte	20.0 °C	2.75 g/cm³ Show Material materials with Dichte of 2.75 g/cm³	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung	20.0 °C	6.0 % Show Material materials with Dehnung of 6.0 %	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube	A10
	20.0 °C	8.0 % Show Material materials with Dehnung of 8.0 %	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Elastizitätsmodul		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa				Typical for Wrought 6000 Series Aluminium
Härte, Brinell	20.0 °C	80.0 [-] Show Material materials with Härte, Brinell of 80.0 [-]	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 6000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 6000 Series Aluminium
Schubmodule		26.0 - 26.5 GPa Show Material materials with Schubmodule of 26.0 - 26.5 GPa				Typical for Wrought 6000 Series Aluminium
Zugfestigkeit	20.0 °C	275.0 MPa Show Material materials with Zugfestigkeit of 275.0 MPa	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	100.0 °C	2.3e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3e-05 1/K	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Schmelzpunkt		555.0 - 655.0 °C Show Material materials with Schmelzpunkt of 555.0 - 655.0 °C				Typical for Wrought 6000 Series Aluminium
Spezifische Wärmekapazität		887.0 - 963.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 887.0 - 963.0 J/(kg·K)				Typical for Wrought 6000 Series Aluminium
Wärmeleitfähigkeit	20.0 °C	163.0 - 186.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 163.0 - 186.0 W/(m·K)	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elektrische Leitfähigkeit	20.0 °C	24000000.0 - 28000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 24000000.0 - 28000000.0 S/m	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
spezifischer Widerstand		2.9e-08 - 5e-08 Ω·m Show Material materials with spezifischer Widerstand of 2.9e-08 - 5e-08 Ω·m				Typical for Wrought 6000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Bismut	0.7 Show Material materials with Bismut of 0.7	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Blei	0.4 - 2.0 % Show Material materials with Blei of 0.4 - 2.0 %	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Chrom	0.3 Show Material materials with Chrom of 0.3	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Eisen	0.5 Show Material materials with Eisen of 0.5	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Kupfer	0.1 Show Material materials with Kupfer of 0.1	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Magnesium	0.6 - 1.2 % Show Material materials with Magnesium of 0.6 - 1.2 %	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Mangan	0.4 - 1.0 % Show Material materials with Mangan of 0.4 - 1.0 %	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Silizium	0.6 - 1.4 % Show Material materials with Silizium of 0.6 - 1.4 %	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Titan	0.2 Show Material materials with Titan of 0.2	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Zink	0.3 Show Material materials with Zink of 0.3	T8	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Technological properties

Property

Workability

Excellent workability.

Looking for suppliers of this material? Click to see 2 supplier of DIN 1725-1 Grade 3.0615 T8 on Matmatch