DIN 1725-1 Grade 3.3206 T3

Want to keep this datasheet? Save it now in your required format

Description

This cold and hot hardenable material reaches mechanical strength from 200 to 250 MPa with A5-elongation at break of approx. 10 %. In the warm and cold-hardened state this alloy is only limited ductile, in the soft material condition however well. Weldability, corrosion resistance and anodising of this material are good. Due to the special suitability of this alloy for the extrusion those are present lot of profile cross-sectional shapes for application in static loading case in the automobile construction or in the building industry. The company Erbsloeh Aluminum leads under evenly this material number among other things the trade name AlMgSi0,3. It pay attention that only two further trade names (6030 and 466) of this company to this designation are to be assigned. Heat treatment for hardening: solution annealing: 525 to 540 °C, quenching on air or in water cold ageing: 5 to 8 d at ambient temperatures hot ageing: 4 to 16 h at 155 to 190 °C. Application: Window, doors, window walls, front plates, roller shutter, roll gates, bearing constructions, heat exchanger (gilled pipes), commercial motor vehicle superstructures, machine tables, metal goods, food industry, equipment of rail-mounted vehicles (stroke sun roofs, railroad car doors), optics, reflectors, operating sectors of hydraulic/pneumatics in mechanical engineering, trunk superstructures in the boat and shipbuilding, sail masts, road signs, trim in the automobile engineering, shower cubicles, fences and partitions, pipings in compressed gas tanks, camping furniture.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte	20.0 °C	2.7 g/cm³ Show Material materials with Dichte of 2.7 g/cm³	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung	20.0 °C	3.0 % Show Material materials with Dehnung of 3.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire	A100
	20.0 °C	6.0 % Show Material materials with Dehnung of 6.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire	A10
	20.0 °C	6.0 % Show Material materials with Dehnung of 6.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire	A100
	20.0 °C	10.0 % Show Material materials with Dehnung of 10.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire	A10
	20.0 °C	13.0 % Show Material materials with Dehnung of 13.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube	A10
	20.0 °C	15.0 % Show Material materials with Dehnung of 15.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube
Elastizitätsmodul	20.0 °C	67.0 GPa Show Material materials with Elastizitätsmodul of 67.0 GPa	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Härte, Brinell	20.0 °C	45.0 [-] Show Material materials with Härte, Brinell of 45.0 [-]	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube
	20.0 °C	60.0 [-] Show Material materials with Härte, Brinell of 60.0 [-]	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire
	20.0 °C	80.0 [-] Show Material materials with Härte, Brinell of 80.0 [-]	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 6000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 6000 Series Aluminium
Schubmodule	20.0 °C	25.0 GPa Show Material materials with Schubmodule of 25.0 GPa	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Zugfestigkeit	20.0 °C	130.0 MPa Show Material materials with Zugfestigkeit of 130.0 MPa	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube
	20.0 °C	200.0 MPa Show Material materials with Zugfestigkeit of 200.0 MPa	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire
	20.0 °C	270.0 MPa Show Material materials with Zugfestigkeit of 270.0 MPa	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Wire

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung		1.6e-05 - 2.4e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.6e-05 - 2.4e-05 1/K				Typical for Wrought 6000 Series Aluminium
Schmelzpunkt		555.0 - 655.0 °C Show Material materials with Schmelzpunkt of 555.0 - 655.0 °C				Typical for Wrought 6000 Series Aluminium
Spezifische Wärmekapazität		887.0 - 963.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 887.0 - 963.0 J/(kg·K)				Typical for Wrought 6000 Series Aluminium
Wärmeleitfähigkeit	20.0 °C	220.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 220.0 W/(m·K)	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elektrische Leitfähigkeit	20.0 °C	30000000.0 - 32000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 30000000.0 - 32000000.0 S/m	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
spezifischer Widerstand		2.9e-08 - 5e-08 Ω·m Show Material materials with spezifischer Widerstand of 2.9e-08 - 5e-08 Ω·m				Typical for Wrought 6000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.05 Show Material materials with Chrom of 0.05	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Eisen	0.1 - 0.3 % Show Material materials with Eisen of 0.1 - 0.3 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Kupfer	0.1 Show Material materials with Kupfer of 0.1	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Magnesium	0.35 - 0.6 % Show Material materials with Magnesium of 0.35 - 0.6 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Mangan	0.1 Show Material materials with Mangan of 0.1	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Silizium	0.3 - 0.6 % Show Material materials with Silizium of 0.3 - 0.6 %	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Titan	0.1 Show Material materials with Titan of 0.1	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire
Zink	0.15 Show Material materials with Zink of 0.15	T3	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 492, VdTÜV WB 420-4	Profile, Rod, Tube, Wire

Technological properties

Property

Workability

Excellent workability.

Looking for suppliers of this material? Click to see 6 supplier of DIN 1725-1 Grade 3.3206 T3 on Matmatch