General
Property | Temperature | Value |
---|---|---|
Densidad | 23.0 °C | 1.76 g/cm³ Show Supplier Material materials with Densidad of 1.76 g/cm³ |
Mecánica
Property | Temperature | Value |
---|---|---|
Hardness, Rockwell L | 23.0 °C | 80 [-] Show Supplier Material materials with Hardness, Rockwell L of 80 [-] |
Módulo elástico | 23.0 °C | 10.5 GPa Show Supplier Material materials with Módulo elástico of 10.5 GPa |
Resistencia a la compresión | 23.0 °C | 90 MPa Show Supplier Material materials with Resistencia a la compresión of 90 MPa |
Resistencia a la flexión | 23.0 °C | 50 MPa Show Supplier Material materials with Resistencia a la flexión of 50 MPa |
Resistencia a la tracción | 23.0 °C | 35 MPa Show Supplier Material materials with Resistencia a la tracción of 35 MPa |
Aplicaciones térmicas
Property | Temperature | Value | Comment |
---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 3.2E-6 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 3.2E-6 1/K | average for 20-100°C |
Contenido de cenizas | 23.0 °C | 0.02 % Show Supplier Material materials with Contenido de cenizas of 0.02 % | For applications requiring low ash, a purified version of this grade is available |
Thermal conductivity, in-plane | 23.0 °C | 90 W/(m·K) Show Supplier Material materials with Thermal conductivity, in-plane of 90 W/(m·K) |
Eléctrico
Property | Temperature | Value |
---|---|---|
Resistividad eléctrica | 23.0 °C | 1.3E-5 Ω·m Show Supplier Material materials with Resistividad eléctrica of 1.3E-5 Ω·m |
Technological properties
Property | ||
---|---|---|
Application areas | Permanent molds, Composite tooling, Continuous casting dies, Hot pressing molds and punches, Plunger and rams | |
Processing history | Isomolded |