General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad | 23.0 °C | 7 g/cm³ Show Material materials with Densidad of 7 g/cm³ | Typical for Cast/Wrought Aluminium Zinc Grade |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Coeficiente de Poisson | 23.0 °C | 0.29 [-] Show Material materials with Coeficiente de Poisson of 0.29 [-] | Typical for Magnesium |
Módulo de cizallamiento | 23.0 °C | 45 GPa Show Material materials with Módulo de cizallamiento of 45 GPa | Typical for Magnesium |
Módulo elástico | 23.0 °C | 40 - 45 GPa Show Material materials with Módulo elástico of 40 - 45 GPa | Typical for Cast/Wrought Aluminium Zinc Grade |
Aplicaciones térmicas
Property | Temperature | Value | Comment |
---|---|---|---|
Calor específico | 23.0 °C | 800 - 1100 J/(kg·K) Show Material materials with Calor específico of 800 - 1100 J/(kg·K) | Typical for Cast/Wrought Aluminium Zinc Grade |
Coeficiente de dilatación térmica | 23.0 °C | 2.5E-5 - 2.6E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.5E-5 - 2.6E-5 1/K | Typical for Cast/Wrought Aluminium Zinc Grade |
Conductividad térmica | 23.0 °C | 44 - 110 W/(m·K) Show Material materials with Conductividad térmica of 44 - 110 W/(m·K) | Typical for Cast/Wrought Aluminium Zinc Grade |
Temperatura de fusión | 365 - 645 °C Show Material materials with Temperatura de fusión of 365 - 645 °C | Typical for Cast/Wrought Aluminium Zinc Grade |
Chemical properties
Property | Value |
---|---|
Aluminio | 8.3 - 9.7 % Show Material materials with Aluminio of 8.3 - 9.7 % |
Berilio | 5E-4 - 1.5E-3 % Show Material materials with Berilio of 5E-4 - 1.5E-3 % |
Cobre | 0.03 % Show Material materials with Cobre of 0.03 % |
Hierro | 4E-3 - 5E-3 % Show Material materials with Hierro of 4E-3 - 5E-3 % |
Manganeso | 0.15 - 0.5 % Show Material materials with Manganeso of 0.15 - 0.5 % |
Níquel | 1E-3 - 2E-3 % Show Material materials with Níquel of 1E-3 - 2E-3 % |
Otro | each 0.02. Rest Mg, if the minimum Mn or maximum Fe content does not meet the specifications, then the Fe/Mg ratio must not exceed 0.032,each 0.01. Rest Mg, if the minimum Mn or maximum Fe content does not meet the specifications, then the Fe/Mg ratio must not exceed 0.032 |
Silicona | 0.08 - 0.1 % Show Material materials with Silicona of 0.08 - 0.1 % |
Zinc | 0.35 - 1 % Show Material materials with Zinc of 0.35 - 1 % |