EN 1179 Grade Z2

Want to keep this datasheet? Save it now in your required format

Description

The primary-zinc material Z2 is acc. to the former material Zn99,99, material number 2.2040, used for zinc casting alloys as per DIN 1743, for soluble anodes, for etching plates, deep-drawing brass, deep-drawing nickel silver, for zinc plates, zinc band and wire as well as for wire galvanization.

Related Standards

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.13 g/cm³

Show Material materials with Densidad of 7.13 g/cm³

Typical for Zinc

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.25 [-]

Show Material materials with Coeficiente de Poisson of 0.25 [-]

Typical for Zinc

Módulo de cizallamiento

23.0 °C

42 GPa

Show Material materials with Módulo de cizallamiento of 42 GPa

Typical for Zinc

Módulo elástico

23.0 °C

105 GPa

Show Material materials with Módulo elástico of 105 GPa

Typical for Zinc

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

272 - 525 J/(kg·K)

Show Material materials with Calor específico of 272 - 525 J/(kg·K)

Typical for Zinc

Coeficiente de dilatación térmica

23.0 °C

2.2E-5 - 2.8E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.2E-5 - 2.8E-5 1/K

Typical for Zinc

Conductividad térmica

23.0 °C

105 - 125 W/(m·K)

Show Material materials with Conductividad térmica of 105 - 125 W/(m·K)

Typical for Zinc

Temperatura de fusión

380 - 420 °C

Show Material materials with Temperatura de fusión of 380 - 420 °C

Typical for Zinc

Chemical properties

PropertyValue

Cadmio

3E-3 %

Show Material materials with Cadmio of 3E-3 %

Cobre

2E-3 %

Show Material materials with Cobre of 2E-3 %

Estaño

1E-3 %

Show Material materials with Estaño of 1E-3 %

Hierro

3E-3 %

Show Material materials with Hierro of 3E-3 %

Otro

Zn corresponds to the nominal zinc composition, sum of the elements Pb, Cd, Fe, Sn, Cu and Al max. 0.01

Plomo

5E-3 %

Show Material materials with Plomo of 5E-3 %

Zinc

99.99 %

Show Material materials with Zinc of 99.99 %