EN 12844 Grade ZP5

Want to keep this datasheet? Save it now in your required format

Description

The material ZP5 with the material number ZP0410 is the preferred alloy for pressure castings. In its property profile, the alloy combines good mechanical properties with good resistance to corrosion, good dimensional accuracy und stability of accurate dimensions as well as with the possibility to galvanically deposit almost all metals on castings of this alloy. With observance of increased purity and of suitable processing circumstances, the material is applicable in extreme climatic conditions. The tensile strength depends on the wall thickness. With the wall thickness of the casting becoming smaller, the strength increases. The casting temperature ought to be about 425 degrees C (450 degrees C maximum) the forming temperature (pressure casting) is to be adjusted to about 180 to 250 degrees C maximum. According to DIN EN 12844, the alternating stress fatigue strength (time strength) is 56 N/mm² with 100 million reversals of stress the creep life (0.5 per cent, 3000 h) is 100 N/mm². The temperature coefficient of the length is 27 µm/m*K.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	6.7 g/cm³ Show Material materials with Densidad of 6.7 g/cm³

Mecánica

Property	Temperature	Value	Comment
Bending Fatigue Strength	23.0 °C	56 MPa Show Material materials with Bending Fatigue Strength of 56 MPa
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Zinc Aluminium
Dureza Brinell	20.0 °C	90 - 92 [-] Show Material materials with Dureza Brinell of 90 - 92 [-]
	23.0 °C	92 [-] Show Material materials with Dureza Brinell of 92 [-]
	80.0 °C	65 [-] Show Material materials with Dureza Brinell of 65 [-]
	150.0 °C	38 [-] Show Material materials with Dureza Brinell of 38 [-]

Elongación	20.0 °C	4 % Show Material materials with Elongación of 4 %
	80.0 °C	12 % Show Material materials with Elongación of 12 %
	150.0 °C	25 % Show Material materials with Elongación of 25 %
	Unlock all property charts
Elongación A50	20.0 °C	5 % Show Material materials with Elongación A50 of 5 %
	23.0 °C	5 % Show Material materials with Elongación A50 of 5 %
	Unlock all property charts
Límite elástico Rp 0,2	20.0 °C	230 - 250 MPa Show Material materials with Límite elástico Rp 0,2 of 230 - 250 MPa
	23.0 °C	250 MPa Show Material materials with Límite elástico Rp 0,2 of 250 MPa
	80.0 °C	180 MPa Show Material materials with Límite elástico Rp 0,2 of 180 MPa
	150.0 °C	90 MPa Show Material materials with Límite elástico Rp 0,2 of 90 MPa
	Unlock all property charts
Módulo elástico	20.0 °C	85 GPa Show Material materials with Módulo elástico of 85 GPa
Resistencia a la tracción	20.0 °C	300 - 330 MPa Show Material materials with Resistencia a la tracción of 300 - 330 MPa
	23.0 °C	330 MPa Show Material materials with Resistencia a la tracción of 330 MPa
	80.0 °C	240 MPa Show Material materials with Resistencia a la tracción of 240 MPa
	150.0 °C	160 MPa Show Material materials with Resistencia a la tracción of 160 MPa
	Unlock all property charts

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	393 - 525 J/(kg·K) Show Material materials with Calor específico of 393 - 525 J/(kg·K)	Typical for Zinc Aluminium
Coeficiente de dilatación térmica	23.0 °C	2.2E-5 - 2.8E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.2E-5 - 2.8E-5 1/K	Typical for Zinc Aluminium
Conductividad térmica	20.0 °C	110 W/(m·K) Show Material materials with Conductividad térmica of 110 W/(m·K)
Temperatura de fusión		375 - 485 °C Show Material materials with Temperatura de fusión of 375 - 485 °C	Typical for Zinc Aluminium

Eléctrico

Property	Temperature	Value
Conductividad eléctrica	20.0 °C	1.51E+7 S/m Show Material materials with Conductividad eléctrica of 1.51E+7 S/m
Resistividad eléctrica	20.0 °C	6.6E-8 Ω·m Show Material materials with Resistividad eléctrica of 6.6E-8 Ω·m

Chemical properties

Property	Value
Aluminio	3.7 - 4.3 % Show Material materials with Aluminio of 3.7 - 4.3 %
Cadmio	5E-3 % Show Material materials with Cadmio of 5E-3 %
Cobre	0.7 - 1.2 % Show Material materials with Cobre of 0.7 - 1.2 %
Estaño	2E-3 % Show Material materials with Estaño of 2E-3 %
Hierro	0.05 % Show Material materials with Hierro of 0.05 %
Magnesio	0.03 - 0.06 % Show Material materials with Magnesio of 0.03 - 0.06 %
Níquel	0.02 % Show Material materials with Níquel of 0.02 %
Otro	Rest Zn
Plomo	5E-3 % Show Material materials with Plomo of 5E-3 %
Silicona	0.03 % Show Material materials with Silicona of 0.03 %
Zinc	94.33 % Show Material materials with Zinc of 94.33 %

Looking for suppliers of this material? Click to see 1 supplier of EN 12844 Grade ZP5 on Matmatch