Pebax® 7433 SA 01 MED

Nombres alternativos y comerciales
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide 7433 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.

Pebax® 7433 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request, letters regarding USP Class VI compliance can be provided.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Abrasion resistance	40.5 mm³ Show Supplier Material materials with Abrasion resistance of 40.5 mm³	dry	ISO 4649
Absorción de agua	1.43 % Show Supplier Material materials with Absorción de agua of 1.43 %		Sim. to ISO 62
Densidad	1.01 g/cm³ Show Supplier Material materials with Densidad of 1.01 g/cm³	dry	ISO 1183
Moisture absorption	0.76 % Show Supplier Material materials with Moisture absorption of 0.76 %		Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		66 [-] Show Supplier Material materials with Dureza Shore D of 66 [-]	dry	ISO 7619-1	15 seconds
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elongation at yield		17 % Show Supplier Material materials with Elongation at yield of 17 %	cond.	ISO 527-1/-2
Módulo elástico		0.7 GPa Show Supplier Material materials with Módulo elástico of 0.7 GPa	cond.	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	6 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 6 kJ/m²	cond.	ISO 179/1eA
	23 °C	19 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 19 kJ/m²	cond.	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	174 °C Show Supplier Material materials with Temperatura de fusión of 174 °C	dry	ISO 11357-1/-3	10°C/min
Temperatura de reblandecimiento Vicat	129 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 129 °C		ISO 306	50°C/h 50N

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.2 % Show Supplier Material materials with Contracción of 0.2 %	dry	ISO 294-4
	0.7 % Show Supplier Material materials with Contracción of 0.7 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Healthcare-Other,IV Bags,Medical Catheters

Certifications

USP Class VI

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C.

Typical mold temperature : 25 – 60°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 220°C / 235°C / 250°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

Pebax® 7433 SA 01 MED

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades