Rubalit® 708HP C

Want to keep this datasheet? Save it now in your required format

Description

Rubalit® 708 HP offers consistently reliable and convincing performance even when subject to high thermal and electrical loads in terms of its:

  • Thermocycling capability
  • Thermal shock resistance
  • Flexural strength
  • Surface quality
  • Thermal conductivity

    This makes Rubalit® 708 HP ideal for power electronics in conjunction with direct copper bonding (DCB) and active metal brazing (AMB).

  • Los datos sobre este material han sido proporcionados por CeramTec.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    Propiedades

    General

    PropertyValueComment

    Absorción de agua

    0.1 %

    Show Supplier Material materials with Absorción de agua of 0.1 %

    Densidad

    3.73 g/cm³

    Show Supplier Material materials with Densidad of 3.73 g/cm³

    Rugosidad superficial

    0.6 μm

    Show Supplier Material materials with Rugosidad superficial of 0.6 μm

    as fired surface

    Mecánica

    PropertyValueTesting StandardComment

    Resistencia a la flexión

    450 MPa

    Show Supplier Material materials with Resistencia a la flexión of 450 MPa

    DR sigma 0

    0.63 mm thickness | rings 6 / 12 mm

    Aplicaciones térmicas

    PropertyTemperatureValueComment

    Calor específico

    20 °C

    0.7 J/(kg·K)

    Show Supplier Material materials with Calor específico of 0.7 J/(kg·K)

    100 °C

    0.8 J/(kg·K)

    Show Supplier Material materials with Calor específico of 0.8 J/(kg·K)

    Coeficiente de dilatación térmica

    6e-06 - 8e-06 1/K

    Show Supplier Material materials with Coeficiente de dilatación térmica of 6e-06 - 8e-06 1/K

    100-200°C

    6e-06 - 8e-06 1/K

    Show Supplier Material materials with Coeficiente de dilatación térmica of 6e-06 - 8e-06 1/K

    100-300°C

    6.7e-06 - 8.7e-06 1/K

    Show Supplier Material materials with Coeficiente de dilatación térmica of 6.7e-06 - 8.7e-06 1/K

    100-600°C

    7e-06 - 9e-06 1/K

    Show Supplier Material materials with Coeficiente de dilatación térmica of 7e-06 - 9e-06 1/K

    100-800°C

    Conductividad térmica

    20 °C

    22 W/(m·K)

    Show Supplier Material materials with Conductividad térmica of 22 W/(m·K)

    Xe-flash | sample 16*16mm² | material specific thickness ≤ 3.5mm

    Eléctrico

    PropertyTemperatureValueFrequencyComment

    Constante dieléctrica

    8.3 - 11.3 [-]

    Show Supplier Material materials with Constante dieléctrica of 8.3 - 11.3 [-]

    1 GHz, 10 MHz, 100 MHz

    2mm thickness | Ra ≤ 0.4μm

    Factor de disipación

    0.01 [-]

    Show Supplier Material materials with Factor de disipación of 0.01 [-]

    1 GHz, 10 MHz, 100 MHz

    max. | 2mm thickness | Ra ≤ 0.4μm

    Resistividad eléctrica

    20 °C

    1e+11 Ω·m

    Show Supplier Material materials with Resistividad eléctrica of 1e+11 Ω·m

    200 °C

    1e+09 Ω·m

    Show Supplier Material materials with Resistividad eléctrica of 1e+09 Ω·m

    400 °C

    1e+07 Ω·m

    Show Supplier Material materials with Resistividad eléctrica of 1e+07 Ω·m

    600 °C

    100000 Ω·m

    Show Supplier Material materials with Resistividad eléctrica of 100000 Ω·m

    800 °C

    100000 Ω·m

    Show Supplier Material materials with Resistividad eléctrica of 100000 Ω·m

    Rigidez dieléctrica

    15 kV/mm

    Show Supplier Material materials with Rigidez dieléctrica of 15 kV/mm

    min. | 0.635 mm thickness

    Technological properties

    Property
    Chemical composition

    The material main component is Al₂O₃ with 96% content. Residue mainly consists of MgO, SiO2 and CaO and traces of other elements.