TECACOMP PPS TC black 4084

Want to keep this datasheet? Save it now in your required format

Description

PPS (Polyphenylensulfide) filled with graphite showing high thermal conductivity

Equivalent Materials

Los datos sobre este material han sido proporcionados por Ensinger GmbH.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueTesting StandardComment

Absorción de agua

0.1 %

Show Supplier Material materials with Absorción de agua of 0.1 %

DIN EN ISO 62

max. | 23°C | 50 % r.h. up to saturation

Densidad

1.6 g/cm³

Show Supplier Material materials with Densidad of 1.6 g/cm³

Mecánica

PropertyValueTesting StandardComment

Elongación

0.8 %

Show Supplier Material materials with Elongación of 0.8 %

DIN EN ISO 527-1

50 mm/min

Módulo elástico

10.4 GPa

Show Supplier Material materials with Módulo elástico of 10.4 GPa

DIN EN ISO 527-1

50 mm/min

Resistencia a la tracción

55 MPa

Show Supplier Material materials with Resistencia a la tracción of 55 MPa

DIN EN ISO 527-1

50 mm/min

Resistencia al choque, ensayo Charpy no entallado

7 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 7 kJ/m²

DIN EN ISO 179-1eU

Aplicaciones térmicas

PropertyValueTesting StandardComment

Coeficiente de dilatación térmica

1.8e-05 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 1.8e-05 1/K

DIN EN ISO 11359-1/2

at 23-80°C

2.5e-05 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 2.5e-05 1/K

DIN EN ISO 11359-1/2

at 23-80°C, Transverse

4e-05 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 4e-05 1/K

DIN EN ISO 11359-1/2

at 100-200°C

5.7e-05 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 5.7e-05 1/K

DIN EN ISO 11359-1/2

at 100-200°C, Transverse

Conductividad térmica

2.41 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 2.41 W/(m·K)

DIN EN 821

in-plane

6.35 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 6.35 W/(m·K)

DIN EN 821

through-plane

Difusividad térmica

1.62 mm²/s

Show Supplier Material materials with Difusividad térmica of 1.62 mm²/s

DIN EN 821

through-plane

4.27 mm²/s

Show Supplier Material materials with Difusividad térmica of 4.27 mm²/s

DIN EN 821

in-plane

Temperatura de fusión

280 °C

Show Supplier Material materials with Temperatura de fusión of 280 °C

DIN 53765

Temperatura de transición del vidrio

90 °C

Show Supplier Material materials with Temperatura de transición del vidrio of 90 °C

DIN 53765

Temperatura máx. de funcionamiento

230 °C

Show Supplier Material materials with Temperatura máx. de funcionamiento of 230 °C

Long

260 °C

Show Supplier Material materials with Temperatura máx. de funcionamiento of 260 °C

Short

Inflamabilidad

UL94 class V0 for 0.8mm thickness, DIN IEC 60695-11-10

Eléctrico

PropertyValueTesting Standard

Conductividad eléctrica

5 S/m

Show Supplier Material materials with Conductividad eléctrica of 5 S/m

DIN EN ISO 3915

Surface resistivity

32000 Ω/sq

Show Supplier Material materials with Surface resistivity of 32000 Ω/sq

DIN EN 61340-2-3

Volume resistivity

1.3e+06 Ω·cm

Show Supplier Material materials with Volume resistivity of 1.3e+06 Ω·cm

DIN EN ISO 3915

Rheological Properties

PropertyValueTesting StandardComment

Contracción

0.58 %

Show Supplier Material materials with Contracción of 0.58 %

DIN EN ISO 294-4

0.63 %

Show Supplier Material materials with Contracción of 0.63 %

DIN EN ISO 294-4

Transverse

Velocidad de flujo de la masa derretida

50 g/10min

Show Supplier Material materials with Velocidad de flujo de la masa derretida of 50 g/10min

DIN EN ISO 1133

316°C/5kg

Velocidad de flujo del volumen derretido

30 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 30 cm³/10min

DIN EN ISO 1133

316°C/5kg

Technological properties

Property
Application areas

Electrical engineering, LED lighting technology, Mechanical engineering, Automotive industry

camera, moulded interconnect device (PCB, LDS), power distribution in electronics and radar

Color

Black

Fillers

Graphite

Processing methods

Permissible residual moisture content (%): 0.05, drying temperature (°C): 150, drying time (h): 6, mould temperature (°C): 160, material temperature (°C): 340, cylinder/processing temperature (°C): 330