Propiedades
General
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Absorción de agua | 0.1 % Show Supplier Material materials with Absorción de agua of 0.1 % | DIN EN ISO 62 | max. | 23°C | 50 % r.h. up to saturation |
Densidad | 1.67 g/cm³ Show Supplier Material materials with Densidad of 1.67 g/cm³ | ||
Densidad aparente | 0.9 g/cm³ Show Supplier Material materials with Densidad aparente of 0.9 g/cm³ | EN ISO 60 |
Mecánica
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Elongación | 2.5 % Show Supplier Material materials with Elongación of 2.5 % | DIN EN ISO 527-1 | 50 mm/min |
Módulo elástico | 10.9 GPa Show Supplier Material materials with Módulo elástico of 10.9 GPa | DIN EN ISO 527-1 | 50 mm/min |
Resistencia a la tracción | 105 MPa Show Supplier Material materials with Resistencia a la tracción of 105 MPa | DIN EN ISO 527-1 | 50 mm/min |
Resistencia al choque, ensayo Charpy no entallado | 35 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 35 kJ/m² | DIN EN ISO 179-1eU |
Aplicaciones térmicas
| Property | Value | Testing Standard | Pressure | Comment | |||
|---|---|---|---|---|---|---|---|
Calor específico | 970 J/(kg·K) Show Supplier Material materials with Calor específico of 970 J/(kg·K) | DIN EN 821 | |||||
Coeficiente de dilatación térmica | 1.8e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.8e-05 1/K | DIN EN ISO 11359-1/2 | at 23-100°C | ||||
2.6e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.6e-05 1/K | DIN EN ISO 11359-1/2 | at 23-100°C, Transverse | |||||
4.6e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 4.6e-05 1/K | DIN EN ISO 11359-1/2 | at 200-260°C | |||||
6.3e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 6.3e-05 1/K | DIN EN ISO 11359-1/2 | at 260-300°C | |||||
6.7e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 6.7e-05 1/K | DIN EN ISO 11359-1/2 | at 200-260°C, Transverse | |||||
8.8e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 8.8e-05 1/K | DIN EN ISO 11359-1/2 | at 260-300°C, Transverse | |||||
Conductividad térmica | 0.5 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.5 W/(m·K) | DIN EN 821 | through-plane | ||||
1.7 W/(m·K) Show Supplier Material materials with Conductividad térmica of 1.7 W/(m·K) | DIN EN 821 | in-plane | |||||
Difusividad térmica | 0.28 mm²/s Show Supplier Material materials with Difusividad térmica of 0.28 mm²/s | DIN EN 821 | through-plane | ||||
1 mm²/s Show Supplier Material materials with Difusividad térmica of 1 mm²/s | DIN EN 821 | in-plane | |||||
Temperatura de flexión bajo carga | 218 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 218 °C | ISO-R 75 Method A | 1.8 MPa | ||||
Temperatura de fusión | 343 °C Show Supplier Material materials with Temperatura de fusión of 343 °C | DIN 53765 | |||||
Temperatura de transición del vidrio | 143 °C Show Supplier Material materials with Temperatura de transición del vidrio of 143 °C | DIN 53765 | |||||
Temperatura máx. de funcionamiento | 260 °C Show Supplier Material materials with Temperatura máx. de funcionamiento of 260 °C | Long | |||||
300 °C Show Supplier Material materials with Temperatura máx. de funcionamiento of 300 °C | Short | ||||||
Inflamabilidad | UL94 class V0, DIN IEC 60695-11-10 | ||||||
Eléctrico
| Property | Value | Frequency | Testing Standard |
|---|---|---|---|
Constante dieléctrica | 3.73 [-] Show Supplier Material materials with Constante dieléctrica of 3.73 [-] | 1KHz | DIN 53483-1 |
Factor de pérdida | 0.0066 [-] Show Supplier Material materials with Factor de pérdida of 0.0066 [-] | 1KHz | DIN 53483-1 |
Rigidez dieléctrica | 17.5 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 17.5 kV/mm | ISO 60243-1 | |
Surface resistivity | 5.8e+12 Ω/sq Show Supplier Material materials with Surface resistivity of 5.8e+12 Ω/sq | DIN EN 61340-2-3 | |
Volume resistivity | 5.8e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 5.8e+13 Ω·cm | DIN EN 61340-2-3 | |
Índice de seguimiento comparativo | 225 V Show Supplier Material materials with Índice de seguimiento comparativo of 225 V | DIN EN 60112 |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Contracción | 0.52 % Show Supplier Material materials with Contracción of 0.52 % | DIN EN ISO 294-4 | |
0.56 % Show Supplier Material materials with Contracción of 0.56 % | DIN EN ISO 294-4 | Transverse | |
Velocidad de flujo de la masa derretida | 77 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 77 g/10min | DIN EN ISO 1133 | 380°C/10kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Automotive industry, Mechanical engineering and Medical technology camera, moulded interconnect device (PCB, LDS), power distribution in electronics and radar | |
| Color | Black | |
| Fillers | Mineral Powder | |
| Processing methods | Permissible residual moisture content (%): 0.02, drying temperature (°C): 160, drying time (h): 6, mould temperature (°C): 210, material temperature (°C): 400, cylinder/processing temperature (°C): 400 | |
| Surface Finish | Laser Marking Parameter- Power: 2-8W - Frequency: 120-180 kHz - Forw ard movement: 1.8-2.4 m/s | |