TECACOMP PPS HTE PW black 1014976

Want to keep this datasheet? Save it now in your required format

Description

PPS (Polyphenylensulfide), main features: for hot compression molding, high electrical conductivity and high thermal conductivity

Equivalent Materials

Los datos sobre este material han sido proporcionados por Ensinger GmbH.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueTesting StandardComment

Absorción de agua

0.1 %

Show Supplier Material materials with Absorción de agua of 0.1 %

DIN EN ISO 62

max. | 23°C | 50 % r.h. up to saturation

Densidad

2 g/cm³

Show Supplier Material materials with Densidad of 2 g/cm³

Densidad aparente

0.55 g/cm³

Show Supplier Material materials with Densidad aparente of 0.55 g/cm³

EN ISO 60

Mecánica

PropertyValueTesting Standard

Flexural strain

0.1 %

Show Supplier Material materials with Flexural strain of 0.1 %

DIN EN ISO 178

Módulo de flexión

15.1 GPa

Show Supplier Material materials with Módulo de flexión of 15.1 GPa

DIN EN ISO 178

Resistencia a la flexión

40 MPa

Show Supplier Material materials with Resistencia a la flexión of 40 MPa

DIN EN ISO 178

Resistencia al choque, ensayo Charpy no entallado

1.3 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 1.3 kJ/m²

DIN EN ISO 179-1eU

Aplicaciones térmicas

PropertyValueTesting StandardComment

Calor específico

900 J/(kg·K)

Show Supplier Material materials with Calor específico of 900 J/(kg·K)

DIN EN 821

Conductividad térmica

25.8 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 25.8 W/(m·K)

DIN EN 821

through-plane

85.8 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 85.8 W/(m·K)

DIN EN 821

in-plane

Difusividad térmica

15.3 mm²/s

Show Supplier Material materials with Difusividad térmica of 15.3 mm²/s

DIN EN 821

through-plane

50.9 mm²/s

Show Supplier Material materials with Difusividad térmica of 50.9 mm²/s

DIN EN 821

in-plane

Temperatura máx. de funcionamiento

200 - 240 °C

Show Supplier Material materials with Temperatura máx. de funcionamiento of 200 - 240 °C

Long

280 °C

Show Supplier Material materials with Temperatura máx. de funcionamiento of 280 °C

Short

Inflamabilidad

UL94 class V0, DIN IEC 60695-11-10

Eléctrico

PropertyValueTesting Standard

Conductividad eléctrica

14200 S/m

Show Supplier Material materials with Conductividad eléctrica of 14200 S/m

DIN EN ISO 3915

Volume resistivity

0.00704 Ω·cm

Show Supplier Material materials with Volume resistivity of 0.00704 Ω·cm

DIN EN 61340-2-3

Technological properties

Property
Application areas

Bipolar plates for PEM fuel cells and heat exchanger

Color

Black

Fillers

Graphite