Polyphthalamide (PPA) HT03 GFR 60 BK Q1G001

Nombres alternativos y comerciales
PA66/6I/X-GF60

Want to keep this datasheet? Save it now in your required format

Description

Partially Aromatic copolyamide with a combination of semi-crystalline polyamide reinforced with 60% Glass fiber, heat stabilized and lubricated for injection molding process.

Eplamid HT03 grades offer the following unique properties in general conditions, and even after moisture absorption: Good Surface Finish, Good Dimensional Stability, Good High Temperature Properties, Good Chemical Resistance to Glycols and Oils and Excellent Creep Resistance. Eplamid HT03 grades are used for molding technical parts where higher operating temperatures and higher stiffness in moist environments are required.

Los datos sobre este material han sido proporcionados por Epsan.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.7 g/cm³ Show Supplier Material materials with Densidad of 1.7 g/cm³	ISO 1183
Water content	23.0 °C	0.1 % Show Supplier Material materials with Water content of 0.1 %	ISO 15512

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2 % Show Supplier Material materials with Elongación of 2 %	ISO 527-2 (5mm/min)
Hardness, Ball Indentation	23.0 °C	280 MPa Show Supplier Material materials with Hardness, Ball Indentation of 280 MPa	ISO 2039-1
Módulo elástico	23.0 °C	22.1 GPa Show Supplier Material materials with Módulo elástico of 22.1 GPa	ISO 527-2 (1mm/min)
Resistencia a la tracción	23.0 °C	260 MPa Show Supplier Material materials with Resistencia a la tracción of 260 MPa	ISO 527-2 (5mm/min)
Resistencia al choque, ensayo Charpy entallado	-30.0 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	ISO 179/1eA
	23.0 °C	14 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 14 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	23.0 °C	90 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 90 kJ/m²	ISO 179/1eU

Aplicaciones térmicas

Property	Temperature	Value	Comment
Contenido de cenizas	23.0 °C	60 % Show Supplier Material materials with Contenido de cenizas of 60 %	ISO 3451-4
Heat deflection temperature, 1.80 MPa		235 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 235 °C	ISO 75-2/A
Heat deflection temperature, 8.0 MPa		180 °C Show Supplier Material materials with Heat deflection temperature, 8.0 MPa of 180 °C	ISO 75-2/B
Temperatura de fusión		260 °C Show Supplier Material materials with Temperatura de fusión of 260 °C	ISO 3146
Temperatura máx. de funcionamiento, corto		215 °C Show Supplier Material materials with Temperatura máx. de funcionamiento, corto of 215 °C	ISO 2578
Temperatura máx. de funcionamiento, largo		110 °C Show Supplier Material materials with Temperatura máx. de funcionamiento, largo of 110 °C	ISO 2578
Inflamabilidad	UL94 (0.8mm) HB

Eléctrico

Property	Temperature	Value	Comment
Rigidez dieléctrica	23.0 °C	33 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 33 kV/mm	IEC 60243-1
Índice de seguimiento comparativo	23.0 °C	600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V	EN 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.1 % Show Supplier Material materials with Contracción of 0.1 %	ISO 294-4 (3mm)
Contracción transversal	23.0 °C	0.3 % Show Supplier Material materials with Contracción transversal of 0.3 %	ISO 294-4 (3mm)

Technological properties

Property
Application areas	Eplamid HT03 grades are used for molding technical parts where higher operating temperatures and higher stiffness in moist environments are required.
Fillers	60% Glass Fiber
Other	Laboratory conditions are 23 ±2°C and 45-55 % RH.

Polyphthalamide (PPA) HT03 GFR 60 BK Q1G001

Description

Ashby charts

Materiales de este proveedor

Propiedades