G-3645UV (LLDPE)

Nombres alternativos y comerciales
G-3645UV (LLDPE)

Want to keep this datasheet? Save it now in your required format

Description

GREENETHENE G-3645UV is a Low Density Linear Polyethylene Resin (LLDPE) in powder form, additivated with antioxidants and UV stabilizers. It is suitable for Rotational Molding applications. Items produced by GREENETHENE G-3645UV have a very good balance between mechanical properties and ESCR resistance. G-3645UV is produced in: natural, black, terracotta, fire red, yellow & blue. GREENETHENE G-3645UV meets the requirement stipulated in standard IS:10141:2001 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceuticals & Drinking Water”. It also conforms to IS 12701:1996 –“Specification For Rotational Moulded Polyethylene Water Storage Tanks.”.

Los datos sobre este material han sido proporcionados por GreenAge Industries.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	0.94 g/cm³ Show Supplier Material materials with Densidad of 0.94 g/cm³	ASTM D1505

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	55 [-] Show Supplier Material materials with Dureza Shore D of 55 [-]	ASTM D2240
Elongación	23.0 °C	165 - 600 % Show Supplier Material materials with Elongación of 165 - 600 %	ASTM D638
Impact strength, Izod notched, ASTM	23.0 °C	250 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 250 J/m	ASTM D256
Límite elástico	23.0 °C	17.5 - 18 MPa Show Supplier Material materials with Límite elástico of 17.5 - 18 MPa	ASTM D638
Módulo de flexión	23.0 °C	0.23 - 0.59 GPa Show Supplier Material materials with Módulo de flexión of 0.23 - 0.59 GPa	ASTM D790
Resistencia a la tracción	23.0 °C	11.75 MPa Show Supplier Material materials with Resistencia a la tracción of 11.75 MPa	ASTM D638

Aplicaciones térmicas

Property	Value	Comment
Temperatura de reblandecimiento Vicat	117 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 117 °C	ASTM D1525

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	4.5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 4.5 g/10min	ASTM D1238, 190°C/2.16kg

Technological properties

Property
Application areas	Due to its combination of mechanical properties, ESCR resistance and fluidity, GREENETHENE G-3645UV is suggested for the production of wide variety of Storage tank applications of water, chemicals & Oils. GREENETHENE G-3645UV can also be used for off-shore flotation buoys and road crash barriers.
Certifications	List of Constituents of Polyethylene in Contact with Foodstuffs, Pharmaceuticals and Drinking Water: IS 10141:2001, IS 12701:1996
Color	Natural, black, terracotta, fire red, yellow and blue.
Processing methods	Compression molded & rotomolded

G-3645UV (LLDPE)

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades