PP TOPILENE® R200P-G20N

Nombres alternativos y comerciales
TOPILENE® R200P-G20N

Want to keep this datasheet? Save it now in your required format

Description

As a substitute for Aluminum-PPR composite pipe, GF(Glass Fiber)-PPR composite pipe has been widely used for hot & cold water supply system. Topilene® R200P GF has an excellent binding strength between glass fiber and PPR, providing outstanding hydrostatic pressure resistance level. Based on technical know-how we have accumulated for decades, Topilene® R200P GF composite is manufactured with well-controlled glass fiber, offering an excellent pipe surface and physical properties.

Los datos sobre este material han sido proporcionados por Hyosung Chemical Corporation.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.03 g/cm³ Show Supplier Material materials with Densidad of 1.03 g/cm³	ASTM D792

Mecánica

Property	Temperature	Value	Comment
Hardness, Rockwell R	23.0 °C	85 [-] Show Supplier Material materials with Hardness, Rockwell R of 85 [-]	ASTM D785
Impact strength, Izod unnotched, ASTM	-10.0 °C	50 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 50 J/m	ASTM D256
	23.0 °C	140 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 140 J/m	ASTM D256

Límite elástico	23.0 °C	41.19 MPa Show Supplier Material materials with Límite elástico of 41.19 MPa	ASTM D638
Módulo de flexión	23.0 °C	1.96 GPa Show Supplier Material materials with Módulo de flexión of 1.96 GPa	ASTM D790

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	125 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 125 °C	ASTM D648
Temperatura de fusión	143 °C Show Supplier Material materials with Temperatura de fusión of 143 °C	ASTM D3418
Temperatura de reblandecimiento Vicat	135 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 135 °C	ASTM D1525

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	0.3 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 0.3 g/10min	ASTM D1238

Technological properties

Property
Application areas	Pipes and fittings, piping for house, radiator pipes, idustrial pipes
Fillers	20% Glass Fiber

PP TOPILENE® R200P-G20N

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades