Mecánica
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Módulo elástico | 23.0 °C | 66 GPa Show Material materials with Módulo elástico of 66 GPa | ASTM D3039 | ||
Módulo elástico transversal | 23.0 °C | 66 GPa Show Material materials with Módulo elástico transversal of 66 GPa | ASTM D3039 | ||
Resistencia a la compresión | 23.0 °C | 638 MPa Show Material materials with Resistencia a la compresión of 638 MPa | ASTM D6641 | ||
Resistencia a la compresión transversal | 23.0 °C | 608 MPa Show Material materials with Resistencia a la compresión transversal of 608 MPa | ASTM D6641 | ||
Resistencia a la tracción | 23.0 °C | 904 MPa Show Material materials with Resistencia a la tracción of 904 MPa | ASTM D3039 | ||
Resistencia a la tracción transversal | 23.0 °C | 904 MPa Show Material materials with Resistencia a la tracción transversal of 904 MPa | ASTM D3039 | ||
Shear modulus, G₁₂ | 23.0 °C | 4.3 GPa Show Material materials with Shear modulus, G₁₂ of 4.3 GPa | ASTM D5379 | ||
Shear strength, τ₁₂ | 23.0 °C | 79 MPa Show Material materials with Shear strength, τ₁₂ of 79 MPa | |||
Shear strength, τ₁₃ | 25.0 °C | 66 MPa Show Material materials with Shear strength, τ₁₃ of 66 MPa | ASTM D2344 | ||
120.0 °C | 40 MPa Show Material materials with Shear strength, τ₁₃ of 40 MPa | ASTM D2344 | |||
150.0 °C | 34 MPa Show Material materials with Shear strength, τ₁₃ of 34 MPa | ASTM D2344 | |||
Liberación de energía de deformación | ASTM D5528 |
Technological properties
Property | ||
---|---|---|
Application areas | Drones;Sports equipment: Frame, wheels, seat, seat post, handlebar, head stem and crank arm of a sports bicycle are made of carbon composite;Geometry strengthen elements: Experimental stringer panel | |
Processing history | Samples for testing were obtained by vacuum infusion based on T26 resin and plasticized carbon fabric (PCF) 22508 covered by veil. | |
Processing methods | Preheat the resin to 60-90°С in its container for transfer to the resin pot. Degas the resin for 30-40 minutes while heating to 90°С. Preheat the tool to 100-110°С (or to 115-120°С for parts having complex shape or for UD parts). Maintaining resin pot temperature of 95 °С and tool temperature of 100-115 °С, begin resin infusion. After complete impregnation increase tool temperature at 2°С/min to 180°С. Dwell at 180°С for 3 h. Cool the tool to 90°С at <5°С/min before releasing part from tool. |