Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 0.93 g/cm³ Show Supplier Material materials with Densidad of 0.93 g/cm³ | ASTM D297 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dureza Shore A | 23.0 °C | 80 - 86 [-] Show Supplier Material materials with Dureza Shore A of 80 - 86 [-] | ASTM 2240, for 5-15 seconds |
Elongación | 23.0 °C | 420 % Show Supplier Material materials with Elongación of 420 % | ASTM D412 |
Resistencia a desgarros | 23.0 °C | 40 kN/m Show Supplier Material materials with Resistencia a desgarros of 40 kN/m | ASTM D624 |
Resistencia a la tracción | 23.0 °C | 9 MPa Show Supplier Material materials with Resistencia a la tracción of 9 MPa | ASTM D412 |
Set de compresión | 23.0 °C | 25 [-] Show Supplier Material materials with Set de compresión of 25 [-] | ASTM D395, 22 h |
70.0 °C | 36 [-] Show Supplier Material materials with Set de compresión of 36 [-] | ASTM D395, 22 h | |
120.0 °C | 56 [-] Show Supplier Material materials with Set de compresión of 56 [-] | ASTM D395, 22 h | |
Aplicaciones térmicas
| Property | Value | Comment |
|---|---|---|
Brittleness temperature | -60 °C Show Supplier Material materials with Brittleness temperature of -60 °C | D746 |
Technological properties
| Property | ||
|---|---|---|
| Processing methods | Extrusion: Hopper Temperature: 140-150°C, Middle Temperature: 150-170°C, Measurment Temperature: 170-190°C, Front Temperature: 180-200°C, Mold Temperature: 170-190°C, Melt Temperature: 160-180°C, Comp. Ratio:3:1, Screen: 20-60 Mesh - Injection: Rear Temperature: 150-170°C, Middle Temperature: 170-190°C, Front Temperature: 190-220°C, Nozzle Temperature: 190-210°C, Melt Temperature:180-200°C, Mold Temperature: 30-80°C, Speed: 100-200rpm, Back Pressure 0.07 - 0.7Mpa | |