Santoprene 101-73

Want to keep this datasheet? Save it now in your required format

Description

As part of the Thermoplstic elastomer (TPE) family, Santorene™ is a thermoplastic vulcanizate (TPV) material, developed by ExxonMobil. It is a fully dynamically vulcanized ethylene propylene diene monomer (EPDM) rubber in a thermoplastic matrix of polypropylene (PP). It makes use of the properties of both rubber and PP, resulting in a high performance elastomer that shows a feel and behaviour similar to rubber, manufactured and processed as easily as plastics.
Santorene™ 101 is a soft versatile TPV that is black in colour. It exhibits good physical and chemical properties and can be processed by injection moulding, blow moulding, and extrusion. However, it is incompatible with PVC and acetal. It is shear-dependent, polyolefin-based, and recyclable. Santorene™ also has high ozone resistance and outstanding flex fatigue resistance. It is delivered as granular material. Its key features include:

High strength and flexibility
High chemical and temperature resistance
Outstanding aesthetics
Excellent sealing capacities and durability
Easy processing and design flexibility
High performance and low costs
Reduced weight and recyclability

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	0.97 g/cm³ Show Material materials with Densidad of 0.97 g/cm³	ASTM D792

Mecánica

Property	Temperature	Value	Comment
Dureza Shore A	23.0 °C	78 [-] Show Material materials with Dureza Shore A of 78 [-]	ISO 868, 15 sec
Elongación	23.0 °C	480 % Show Material materials with Elongación of 480 %	ASTM D412
Resistencia a desgarros	23.0 °C	25 kN/m Show Material materials with Resistencia a desgarros of 25 kN/m	ISO 34-1
Resistencia a la tracción	23.0 °C	7.98 MPa Show Material materials with Resistencia a la tracción of 7.98 MPa	ASTM D412
Set de compresión	70.0 °C	27 [-] Show Material materials with Set de compresión of 27 [-]	ISON 815, 22 hr, Type A

Aplicaciones térmicas

Property	Value	Comment
Brittleness temperature	-60 °C Show Material materials with Brittleness temperature of -60 °C	ISO 812
Relative temperature index, electrical	90 °C Show Material materials with Relative temperature index, electrical of 90 °C	UL 746
Relative temperature index, mechanical strength	90 - 95 °C Show Material materials with Relative temperature index, mechanical strength of 90 - 95 °C	UL 746, 1-3 mm
Temperatura de fusión	202 °C Show Material materials with Temperatura de fusión of 202 °C
Inflamabilidad	HB UL94

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica	23.0 °C	2.5 [-] Show Material materials with Constante dieléctrica of 2.5 [-]	ASTM D150
Rigidez dieléctrica	23.0 °C	27 kV/mm Show Material materials with Rigidez dieléctrica of 27 kV/mm	ASTM D149
Índice de seguimiento comparativo	23.0 °C	0 V Show Material materials with Índice de seguimiento comparativo of 0 V	UL 746, PLC

Technological properties

Property
Application areas	Diaphrams, Seals; Tubing, Electrical Parts, Gaskets, Automotive Applications, Outdoor Appliactions, Air Induction Systems
Color	Black
Processing methods	Blow Molding, Coextrusion, Extrusion Blow Molding, Injection Blow Molding, Sheet Extrusion, Thermoforming, Multi Injection Molding, Cacuum Forming, Profile Extruion - Extrusion: Drying Temperature: 82°C, Drying Time: 3 hr, Melt Temperature: 202°C, Die Temperature: 204°C, Back Pressure: 5-20 MPa - Injection Molding: Drying Temperature: 82°C, Drying Time: 3 hr, Rear Temperature: 177°C, Middle Temperature: 182°C, Front Temperature: 188°C, Nozzle Temperature: 193-277°C, Melt Temperature:193-277°C, Mold Temperature: 10-52°C, Back Pressure: 0.345-0.689 MPa, Screw Speed: 100-200 rpm, Screw Compression Ratio: 2:1-2.5:1

Santoprene 101-73

Description

Ashby charts

Lectura sugerida

Propiedades