SABIC® LLDPE 726NE

Want to keep this datasheet? Save it now in your required format

Description

SABIC® LLDPE 726NE is a butene linear low density polyethylene resin. This grade gives blown films a relatively high stiffness for good machinability and a good overall balance of other performance properties, such as puncture resistance, impact strength and heat sealability. Application Typical applications for SABIC® LLDPE 726NE are shipping sacks, produce bags, can liners and carrier bags. SABIC® LLDPE 726NE has very good optical properties when blended with a LDPE (15-85%). Film properties Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 2,7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	0.93 g/cm³ Show Material materials with Densidad of 0.93 g/cm³	ASTM D1505

Mecánica

Property	Temperature	Value	Comment
Resistencia a desgarros	23.0 °C	20 kN/m Show Material materials with Resistencia a desgarros of 20 kN/m	ISO 6383-2
Resistencia a desgarros transversal	23.0 °C	130 kN/m Show Material materials with Resistencia a desgarros transversal of 130 kN/m	ISO 6383-2

Óptico

Property	Value	Comment
Turbidez	12 % Show Material materials with Turbidez of 12 %	ASTM D1003

Technological properties

Property
Application areas	Shipping sacks, produce bags, can liners and carrier bags.

SABIC® LLDPE 726NE

Description

Ashby charts

Lectura sugerida

Propiedades