Hytrel® G3548 NC010

Nombres alternativos y comerciales
TPC-ET

Want to keep this datasheet? Save it now in your required format

Description

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilisers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free.The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry.Hytrel® G3548 is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	6.9 % Show Material materials with Absorción de agua of 6.9 %	Sim. to ISO 62 \| Immersion 24h
Densidad	23.0 °C	1.15 g/cm³ Show Material materials with Densidad of 1.15 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	24 [-] Show Material materials with Dureza Shore D of 24 [-]	ISO 7619-1 \| 15 seconds
Elongación	23.0 °C	200 % Show Material materials with Elongación of 200 %	ISO 527-1/-2 \| 50mm/min
Módulo de flexión	23.0 °C	0.03 GPa Show Material materials with Módulo de flexión of 0.03 GPa	ISO 178
Módulo elástico	23.0 °C	0.03 GPa Show Material materials with Módulo elástico of 0.03 GPa	ISO 527-1/-2
Resistencia a desgarros	23.0 °C	60 kN/m Show Material materials with Resistencia a desgarros of 60 kN/m	ISO 34-1
Resistencia a desgarros transversal	23.0 °C	80 kN/m Show Material materials with Resistencia a desgarros transversal of 80 kN/m	ISO 34-1
Resistencia a la tracción	23.0 °C	10 MPa Show Material materials with Resistencia a la tracción of 10 MPa	ISO 527-1/-2 \| 50mm/min
Resistencia al choque, ensayo Charpy entallado	No Break @ 23,-6,-40°C, ISO 179/1eA
Resistencia al choque, ensayo Izod no entallado	No Break @ -40°C, ISO 180/1A

Aplicaciones térmicas

Property	Value	Comment
Relative temperature index, electrical	50 °C Show Material materials with Relative temperature index, electrical of 50 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact	50 °C Show Material materials with Relative temperature index, mechanical impact of 50 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength	50 °C Show Material materials with Relative temperature index, mechanical strength of 50 °C	UL 746B \| 120mil
Temperatura de fusión	157 °C Show Material materials with Temperatura de fusión of 157 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat	70 °C Show Material materials with Temperatura de reblandecimiento Vicat of 70 °C	ISO 306 \| 90°F, 2 lbf
Temperatura de transición del vidrio	-45 °C Show Material materials with Temperatura de transición del vidrio of -45 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 3 mm, UL recognition: yes -, FMVSS Class: B -, Burning rate, Thickness 1 mm: 52 mm/min

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.8 % Show Material materials with Contracción of 0.8 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	0.8 % Show Material materials with Contracción transversal of 0.8 %	ISO 294-4, 2577
Velocidad de flujo de la masa derretida		10 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 10 g/10min	ISO 1133 \| 190°C/2.16kg

Technological properties

Property
Processing methods	Drying Recommended: yes, Drying Temperature: 90°C, Drying Time, Dehumidified Dryer: 2-3h, Processing Moisture Content: ≤0.08%, Melt Temperature Optimum: 190°C, Min. melt temperature: 180°C, Max. melt temperature: 200°C, Mold Temperature Optimum: 40°C, Min. mold temperature: 30°C, Max. mold temperature: 40°C

Hytrel® G3548 NC010

Description

Ashby charts

Lectura sugerida

Propiedades