Hytrel® PC945 NC010

Nombres alternativos y comerciales
TPC-ET

Want to keep this datasheet? Save it now in your required format

Description

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilisers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free.The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry.Hytrel® PC945 is a low modulus grade with nominal durometer hardness of 40D. Itcontains anon-discoloring stabilizer and is recommended for injection and extrusion. It is developed for applications such as parts for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and FDA drug and device master files (DMF and MAF) have been established.For details, individual compliance statements are available from your DuPont representative.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.6 % Show Material materials with Absorción de agua of 0.6 %	Sim. to ISO 62 \| Immersion 24h
Densidad	23.0 °C	1.16 g/cm³ Show Material materials with Densidad of 1.16 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.5 [-] Show Material materials with Coeficiente de Poisson of 0.5 [-]
Dureza Shore D	23.0 °C	43 [-] Show Material materials with Dureza Shore D of 43 [-]	max., ISO 7619-1
Elongación	23.0 °C	500 % Show Material materials with Elongación of 500 %	ISO 527-1/-2
Módulo de flexión	23.0 °C	0.06 GPa Show Material materials with Módulo de flexión of 0.06 GPa	ISO 178
Módulo elástico	23.0 °C	0.06 GPa Show Material materials with Módulo elástico of 0.06 GPa	ISO 527-1/-2
Resistencia a desgarros	23.0 °C	102 kN/m Show Material materials with Resistencia a desgarros of 102 kN/m	ISO 34-1
Resistencia a desgarros transversal	23.0 °C	96 kN/m Show Material materials with Resistencia a desgarros transversal of 96 kN/m	ISO 34-1
Resistencia a la tracción	23.0 °C	26 MPa Show Material materials with Resistencia a la tracción of 26 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	No Break @ 23,-6,-40°C, ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	No Break @ 23,-6°C, ISO 179/1eA
Resistencia al choque, ensayo Izod no entallado	No Break @ 23,-40°C, ISO180/1A

Aplicaciones térmicas

Property	Temperature	Value	Comment
Brittleness temperature		-97 °C Show Material materials with Brittleness temperature of -97 °C	ISO 974
Coeficiente de dilatación térmica	23.0 °C	1.3E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1.3E-4 1/K	ISO 11359-1/-2
Coeficiente de dilatación térmica transversal	23.0 °C	1.6E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1.6E-4 1/K	ISO 11359-1/-2
Difusividad térmica	23.0 °C	0 mm²/s Show Material materials with Difusividad térmica of 0 mm²/s
Heat deflection temperature, 0.45 MPa		48 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 48 °C	ISO 75-1/-2
Relative temperature index, electrical		50 °C Show Material materials with Relative temperature index, electrical of 50 °C	UL 746B \| 60mil
Relative temperature index, mechanical impact		50 °C Show Material materials with Relative temperature index, mechanical impact of 50 °C	UL 746B \| 60mil
Relative temperature index, mechanical strength		50 °C Show Material materials with Relative temperature index, mechanical strength of 50 °C	UL 746B \| 60mil
Temperatura de fusión		152 °C Show Material materials with Temperatura de fusión of 152 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat		109 °C Show Material materials with Temperatura de reblandecimiento Vicat of 109 °C	ISO 306 \| 90°F, 2 lbf
Temperatura de transición del vidrio		-50 °C Show Material materials with Temperatura de transición del vidrio of -50 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Oxygen index: 20 %

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	4.7 [-] Show Material materials with Constante dieléctrica, 1 MHz of 4.7 [-]	IEC 62631-2-1
Constante dieléctrica, 100 Hz	23.0 °C	5.2 [-] Show Material materials with Constante dieléctrica, 100 Hz of 5.2 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	0.01 [-] Show Material materials with Dissipation factor, 100Hz of 0.01 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.05 [-] Show Material materials with Dissipation factor, 1MHz of 0.05 [-]	IEC 62631-2-1
Rigidez dieléctrica	23.0 °C	18 kV/mm Show Material materials with Rigidez dieléctrica of 18 kV/mm	IEC 60243-1
Surface resistivity	23.0 °C	2.00E+14 Ω/sq Show Material materials with Surface resistivity of 2.00E+14 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	7.00E+12 Ω·cm Show Material materials with Volume resistivity of 7.00E+12 Ω·cm	IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	600 V Show Material materials with Índice de seguimiento comparativo of 600 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.2 % Show Material materials with Contracción of 0.2 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	0.4 % Show Material materials with Contracción transversal of 0.4 %	ISO 294-4, 2577
Velocidad de flujo de la masa derretida		5.6 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 5.6 g/10min	ISO 1133 \| 190°C/2.16kg
Velocidad de flujo del volumen derretido		5 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 5 cm³/10min	ISO 1133

Technological properties

Property
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-3h, Processing Moisture Content: ≤0.08%, Melt Temperature Optimum: 180°C, Min. melt temperature: 170°C, Max. melt temperature: 190°C, Mold Temperature Optimum: 40°C, Min. mold temperature: 30°C, Max. mold temperature: 40°C

Hytrel® PC945 NC010

Description

Ashby charts

Lectura sugerida

Propiedades