General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Absorción de agua | 23.0 °C | 0.6 % Show Material materials with Absorción de agua of 0.6 % | Sim. to ISO 62 | Immersion 24h |
Densidad | 23.0 °C | 1.13 g/cm³ Show Material materials with Densidad of 1.13 g/cm³ | ISO 1183 |
Mecánica
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Coeficiente de Poisson | 23.0 °C | 0.49 [-] Show Material materials with Coeficiente de Poisson of 0.49 [-] | |||
Dureza Shore D | 23.0 °C | 42 [-] Show Material materials with Dureza Shore D of 42 [-] | max., ISO 7619-1 | ||
Elongación | 23.0 °C | 680 % Show Material materials with Elongación of 680 % | ISO 527-1/-2 | ||
Módulo de flexión | 23.0 °C | 0.08 GPa Show Material materials with Módulo de flexión of 0.08 GPa | ISO 178 | ||
Módulo elástico | 23.0 °C | 0.07 GPa Show Material materials with Módulo elástico of 0.07 GPa | ISO 527-1/-2 | ||
Resistencia a desgarros | 23.0 °C | 124 kN/m Show Material materials with Resistencia a desgarros of 124 kN/m | ISO 34-1 | ||
Resistencia a desgarros transversal | 23.0 °C | 130 kN/m Show Material materials with Resistencia a desgarros transversal of 130 kN/m | ISO 34-1 | ||
Resistencia a la tracción | 23.0 °C | 26 MPa Show Material materials with Resistencia a la tracción of 26 MPa | ISO 527-1/-2 | ||
Resistencia al choque, ensayo Charpy entallado | -40.0 °C | 110 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 110 kJ/m² | No Break @ 23°C, ISO 179/1eU | ||
Resistencia al choque, ensayo Izod no entallado | No Break @ -40,-50°C, ISO 180/1A | ||||
Aplicaciones térmicas
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Brittleness temperature | -100 °C Show Material materials with Brittleness temperature of -100 °C | ISO 974 | |||
Coeficiente de dilatación térmica | 23.0 °C | 1.7E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1.7E-4 1/K | ISO 11359-1/-2 | ||
Coeficiente de dilatación térmica transversal | 23.0 °C | 1.7E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1.7E-4 1/K | ISO 11359-1/-2 | ||
Difusividad térmica | 23.0 °C | 0 mm²/s Show Material materials with Difusividad térmica of 0 mm²/s | |||
Temperatura de fusión | 195 °C Show Material materials with Temperatura de fusión of 195 °C | ISO 11357-1/-3 | 18°F/min | |||
Temperatura de reblandecimiento Vicat | 150 °C Show Material materials with Temperatura de reblandecimiento Vicat of 150 °C | ISO 306 | 90°F, 2 lbf | |||
Temperatura de transición del vidrio | -50 °C Show Material materials with Temperatura de transición del vidrio of -50 °C | ISO 11357-1/-2 | 18°F/min | |||
Inflamabilidad | FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min | ||||
Eléctrico
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dissipation factor, 100Hz | 23.0 °C | 7E-3 [-] Show Material materials with Dissipation factor, 100Hz of 7E-3 [-] | IEC 62631-2-1 |
Dissipation factor, 1MHz | 23.0 °C | 0.01 [-] Show Material materials with Dissipation factor, 1MHz of 0.01 [-] | IEC 62631-2-1 |
Rigidez dieléctrica | 23.0 °C | 18 kV/mm Show Material materials with Rigidez dieléctrica of 18 kV/mm | IEC 60243-1 |
Surface resistivity | 23.0 °C | 2.00E+14 Ω/sq Show Material materials with Surface resistivity of 2.00E+14 Ω/sq | IEC 62631-3-2 |
Volume resistivity | 23.0 °C | 9.00E+12 Ω·cm Show Material materials with Volume resistivity of 9.00E+12 Ω·cm | IEC 62631-3-1 |
Índice de seguimiento comparativo | 23.0 °C | 600 V Show Material materials with Índice de seguimiento comparativo of 600 V | IEC 60112 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 1.6 % Show Material materials with Contracción of 1.6 % | ISO 294-4, 2577 |
Contracción transversal | 23.0 °C | 1.6 % Show Material materials with Contracción transversal of 1.6 % | ISO 294-4, 2577 |
Velocidad de flujo de la masa derretida | 13 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 13 g/10min | ISO 1133 | 230°C/10kg | |
Velocidad de flujo del volumen derretido | 10 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 10 cm³/10min | ISO 1133 |
Technological properties
| Property | ||
|---|---|---|
| Processing methods | Drying Recommended: yes, Drying Temperature: 100°C, Drying Time, Dehumidified Dryer: 3-4h, Processing Moisture Content: ≤0.08%, Melt Temperature Optimum: 230°C, Min. melt temperature: 220°C, Max. melt temperature: 240°C, Mold Temperature Optimum: 45°C, Min. mold temperature: 40°C, Max. mold temperature: 50°C | |