DEF STAN 02-833 / NES 833 Bronze

View suppliers (17)
Want to keep this datasheet? Save it now in your required format

Description

2.0966 (CuAl10Ni5Fe4) is a nickel aluminium bronze manufactured to the exacting requirements of the Ministry of Defence (MoD) that shows the following features and properties:


  • Outstanding resistance to erosion and corrosion
  • High strength and toughness
  • High wear and galling resistance
  • Non-sparking
  • Ultrasonically tested
  • Related Standards

    Equivalent Materials

    Los datos sobre este material han sido proporcionados por Matmatch.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    Propiedades

    General

    PropertyTemperatureValue

    Densidad

    23.0 °C

    7.5 g/cm³

    Show Material materials with Densidad of 7.5 g/cm³

    Mecánica

    PropertyTemperatureValue

    Charpy impact energy, V-notch

    23.0 °C

    27 J

    Show Material materials with Charpy impact energy, V-notch of 27 J

    Elongación

    23.0 °C

    17 %

    Show Material materials with Elongación of 17 %

    Límite elástico Rp 0,2

    23.0 °C

    245 - 325 MPa

    Show Material materials with Límite elástico Rp 0,2 of 245 - 325 MPa

    Resistencia a la tracción

    23.0 °C

    620 - 680 MPa

    Show Material materials with Resistencia a la tracción of 620 - 680 MPa

    Aplicaciones térmicas

    PropertyTemperatureValueComment

    Coeficiente de dilatación térmica

    23.0 °C

    1.8E-5 1/K

    Show Material materials with Coeficiente de dilatación térmica of 1.8E-5 1/K

    for 0-300°C

    Conductividad térmica

    23.0 °C

    59 - 67 W/(m·K)

    Show Material materials with Conductividad térmica of 59 - 67 W/(m·K)

    Temperatura de fusión

    1060 - 1075 °C

    Show Material materials with Temperatura de fusión of 1060 - 1075 °C

    Eléctrico

    PropertyTemperatureValue

    Conductividad eléctrica

    23.0 °C

    6.96E+6 - 8.12E+6 S/m

    Show Material materials with Conductividad eléctrica of 6.96E+6 - 8.12E+6 S/m

    Specific Electrical conductivity

    12 - 14 % IACS

    Show Material materials with Specific Electrical conductivity of 12 - 14 % IACS

    Magnético

    PropertyTemperatureValue

    Permeabilidad magnética relativa

    23.0 °C

    1.5 [-]

    Show Material materials with Permeabilidad magnética relativa of 1.5 [-]

    Chemical properties

    PropertyValueComment

    Aluminio

    8.5 - 10 %

    Show Material materials with Aluminio of 8.5 - 10 %

    Cobre

    Balance

    Hierro

    4 - 5 %

    Show Material materials with Hierro of 4 - 5 %

    Manganeso

    0.5 %

    Show Material materials with Manganeso of 0.5 %

    max.

    Níquel

    4.5 - 5.5 %

    Show Material materials with Níquel of 4.5 - 5.5 %

    Technological properties

    Property
    Application areas

    Offshore & marine: High performance fasteners, valve and pump components, propeller shafts and weapons handling systems;Other: Pipe fittings, heat exchangers, wear plates, thrust washers, bearings, bushes, safety tools, worm wheels and gears

    Corrosion properties

    Excellent resistance to erosion and corrosion