S32760 / SEACOL-760 Duplex Stainless Steel

View suppliers (52)
Want to keep this datasheet? Save it now in your required format

Description

1.4501 (X2CrNiMoCuWN25-7-4) is a grade of super-duplex based on 25% chromium, 7% nickel with an addition of tungsten which enhances the pitting index (PREN) even further above the 40 minimum and also contributes to alloy strength. This high resistance to pitting is combined with a high tensile strength and higher resistance to stress corrosion cracking at moderate temperatures to that of conventional austenitic stainless steels. A small addition of copper (lower than in S32550/AMAZON 256) enhances its general corrosion resistance. It shows the following features and properties:


  • Very high strength
  • Very high resistance to pitting
  • Very good corrosion resistance
  • High resistance to erosion and abrasion in flowing systems
  • High resistance to stress corrosion cracking, fatigue and erosion
  • Related Standards

    Equivalent Materials

    Los datos sobre este material han sido proporcionados por Matmatch.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Propiedades

    General

    PropertyTemperatureValue

    Densidad

    23.0 °C

    7.8 g/cm³

    Show Material materials with Densidad of 7.8 g/cm³

    Mecánica

    PropertyTemperatureValueComment

    Coeficiente de Poisson

    23.0 °C

    0.32 [-]

    Show Material materials with Coeficiente de Poisson of 0.32 [-]

    Dureza Brinell

    23.0 °C

    270 [-]

    Show Material materials with Dureza Brinell of 270 [-]

    max.

    Elongación

    23.0 °C

    25 %

    Show Material materials with Elongación of 25 %

    Límite elástico Rp 0,2

    23.0 °C

    550 MPa

    Show Material materials with Límite elástico Rp 0,2 of 550 MPa

    Módulo de cizallamiento

    23.0 °C

    75 GPa

    Show Material materials with Módulo de cizallamiento of 75 GPa

    Módulo elástico

    23.0 °C

    199 GPa

    Show Material materials with Módulo elástico of 199 GPa

    Resistencia a la tracción

    23.0 °C

    750 MPa

    Show Material materials with Resistencia a la tracción of 750 MPa

    Aplicaciones térmicas

    PropertyTemperatureValueComment

    Calor específico

    23.0 °C

    425 J/(kg·K)

    Show Material materials with Calor específico of 425 J/(kg·K)

    Coeficiente de dilatación térmica

    23.0 °C

    1.11E-5 1/K

    Show Material materials with Coeficiente de dilatación térmica of 1.11E-5 1/K

    for 20-100°C

    Conductividad térmica

    23.0 °C

    14 W/(m·K)

    Show Material materials with Conductividad térmica of 14 W/(m·K)

    for 20-300°C

    Eléctrico

    PropertyTemperatureValue

    Resistividad eléctrica

    23.0 °C

    8E-7 Ω·m

    Show Material materials with Resistividad eléctrica of 8E-7 Ω·m

    Magnético

    PropertyTemperatureValue

    Permeabilidad magnética relativa

    23.0 °C

    33 [-]

    Show Material materials with Permeabilidad magnética relativa of 33 [-]

    Chemical properties

    PropertyValueComment

    Azufre

    0.01 %

    Show Material materials with Azufre of 0.01 %

    max.

    Carbono

    0.03 %

    Show Material materials with Carbono of 0.03 %

    max.

    Cobre

    0.5 - 1 %

    Show Material materials with Cobre of 0.5 - 1 %

    Cromo

    24 - 26 %

    Show Material materials with Cromo of 24 - 26 %

    Fósforo

    0.03 %

    Show Material materials with Fósforo of 0.03 %

    max.

    Hierro

    Balance

    Manganeso

    1 %

    Show Material materials with Manganeso of 1 %

    max.

    Molibdeno

    3 - 4 %

    Show Material materials with Molibdeno of 3 - 4 %

    Nitrógeno

    0.2 - 0.3 %

    Show Material materials with Nitrógeno of 0.2 - 0.3 %

    Níquel

    6 - 8 %

    Show Material materials with Níquel of 6 - 8 %

    Silicona

    1 %

    Show Material materials with Silicona of 1 %

    max.

    Wolframio

    0.5 - 1 %

    Show Material materials with Wolframio of 0.5 - 1 %

    Technological properties

    Property
    Application areas

    Offshore & marine: Offshore platforms, components for gas, oil and process cooling plants, instrumentation, wellhead and subsea wellhead fittings, desalination plants, seawater cooled heat exchangers, cargo heating systems, marine shafts (for boats etc) and high strength fasteners;Chemical processing: Equipment handling organic or dilute sulphuric acid, process solutions contaminated with chlorides, refinery equipment, desulphurising and distillation units, sewage plant components, fire extinguishing systems, general processing and mixing plant

    Corrosion properties

    Very good corrosion resistance