General
Property | Value |
---|---|
Densidad | 1.38 - 1.94 g/cm³ Show Material materials with Densidad of 1.38 - 1.94 g/cm³ |
Mecánica
Property | Value | Comment |
---|---|---|
Elongación | 1.3 - 3.4 % Show Material materials with Elongación of 1.3 - 3.4 % | |
Módulo elástico | 10.0 - 24.3 GPa Show Material materials with Módulo elástico of 10.0 - 24.3 GPa | |
Resistencia a la tracción | 110.0 - 182.0 MPa Show Material materials with Resistencia a la tracción of 110.0 - 182.0 MPa | at 1.3-3.4% strain |
Resistencia al choque, ensayo Charpy entallado | 2.0 - 18.0 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 2.0 - 18.0 kJ/m² | |
Resistencia al choque, ensayo Charpy no entallado | 3.7 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 3.7 kJ/m² | |
29 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 29 kJ/m² |
Aplicaciones térmicas
Property | Value |
---|---|
Coeficiente de dilatación térmica | 0.0 - 4.2e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 0.0 - 4.2e-05 1/K |
Temperatura de fusión | 280.0 - 335.0 °C Show Material materials with Temperatura de fusión of 280.0 - 335.0 °C |
Inflamabilidad | UL 94 V0 |
Eléctrico
Property | Value |
---|---|
Constante dieléctrica | 3.2 [-] Show Material materials with Constante dieléctrica of 3.2 [-] |
4.8 [-] Show Material materials with Constante dieléctrica of 4.8 [-] | |
Resistividad eléctrica | 100000000000000 Ω·m Show Material materials with Resistividad eléctrica of 100000000000000 Ω·m |
Óptico
Property | Value |
---|---|
Transparencia | no |
Technological properties
Property | ||
---|---|---|
Application areas | connectors for PC, baking pans, casserole dishes | |
Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
Processing methods | Injection molding, extrusion, thermoforming |