Sheet Moulding Compound, Unsaturated Polyester Reinforced with 54% Glass Fibre (SMC UP+CF54)

Want to keep this datasheet? Save it now in your required format

Description

Carbon-fiber reinforced polyester engineering polymer molding compound. Very low mold shrinkage and post-shrinkage, very good mechanical strength, very good electrical values.

Los datos sobre este material han sido proporcionados por M-Base.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValue

Densidad

1.600 g/cm³

Show Material materials with Densidad of 1.600 g/cm³

Mecánica

PropertyValueComment

Elongación

1.4 %

Show Material materials with Elongación of 1.4 %

Módulo elástico

32 GPa

Show Material materials with Módulo elástico of 32 GPa

Resistencia a la tracción

200 MPa

Show Material materials with Resistencia a la tracción of 200 MPa

at 1.4% strain

Resistencia al choque, ensayo Charpy no entallado

70 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 70 kJ/m²

Aplicaciones térmicas

PropertyValue

Calor específico

1100 J/(kg·K)

Show Material materials with Calor específico of 1100 J/(kg·K)

Coeficiente de dilatación térmica

0.0000017 1/K

Show Material materials with Coeficiente de dilatación térmica of 0.0000017 1/K

Inflamabilidad

UL 94 HB

Óptico

PropertyValue

Transparencia

no

Technological properties

Property
Application areas

under body panels, exterior panels

Fillers

54% Glass Fiber

Processing methods

Compression molding