Epoxide; Epoxy Reinforced with 25% Glass Fibers and 45% Mineral Powder (EP+GF30+MD20)

Nombres alternativos y comerciales
Bakelite®
Want to keep this datasheet? Save it now in your required format

Description

Epoxy moulding compound, inorganically filled, glass fiber reinforced, heat resistant, dimensionally stable, good electric and mechanical properties, very good chemical resistance and low viscosity.

Los datos sobre este material han sido proporcionados por M-Base.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValue

Densidad

1.83 - 1.93 g/cm³

Show Material materials with Densidad of 1.83 - 1.93 g/cm³

Mecánica

PropertyValueComment

Elongación

4 %

Show Material materials with Elongación of 4 %

Módulo elástico

14.0 - 17.0 GPa

Show Material materials with Módulo elástico of 14.0 - 17.0 GPa

Resistencia a la tracción

50.0 - 70.0 MPa

Show Material materials with Resistencia a la tracción of 50.0 - 70.0 MPa

at 4% strain

Resistencia al choque, ensayo Charpy entallado

3.0 - 6.0 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 3.0 - 6.0 kJ/m²

Resistencia al choque, ensayo Charpy no entallado

7 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 7 kJ/m²

12 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 12 kJ/m²

Aplicaciones térmicas

PropertyValue

Coeficiente de dilatación térmica

2e-05 - 3e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2e-05 - 3e-05 1/K

Conductividad térmica

0.6 - 0.8 W/(m·K)

Show Material materials with Conductividad térmica of 0.6 - 0.8 W/(m·K)

Inflamabilidad

UL 94 HB

Eléctrico

PropertyValue

Constante dieléctrica

5 [-]

Show Material materials with Constante dieléctrica of 5 [-]

8 [-]

Show Material materials with Constante dieléctrica of 8 [-]

Resistividad eléctrica

100000000000.0 - 1000000000000.0 Ω·m

Show Material materials with Resistividad eléctrica of 100000000000.0 - 1000000000000.0 Ω·m

Óptico

PropertyValue

Transparencia

no

Technological properties

Property
Application areas

Bobbins, car electronic, reflectors, spark plug connectors

Fillers

25% Glass Fiber and 45% Mineral Powder

Processing methods

Injection molding, compression molding, transfer molding