EN 10088-1 Grade X8CrNiMoAl15-7-2 precipitation hardened (P1550)

Want to keep this datasheet? Save it now in your required format

Description

The material X8CrNiMoAl15-7-2 is comparable to X 7 CrNiMoAl 15 7 acc. to Key to steel 1995 resp. Register of European steel 1994. The precipitation hardenable steel with high strength and hardness shows good corrosion resistance. Application for clamps and springs, surface facings, bottoms for fuel tanks, transport chains, piston rings and valve components.

Related Standards

EN 10088-1

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Austenitic Stainless Steel
Elongación	20.0 °C	2 % Show Material materials with Elongación of 2 %
Elongación A80	20.0 °C	2 % Show Material materials with Elongación A80 of 2 %
Límite elástico Rp 0,2	20.0 °C	1380 MPa Show Material materials with Límite elástico Rp 0,2 of 1380 MPa
Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Austenitic Stainless Steel
Módulo elástico	20.0 °C	200 GPa Show Material materials with Módulo elástico of 200 GPa
	100.0 °C	195 GPa Show Material materials with Módulo elástico of 195 GPa
	200.0 °C	185 GPa Show Material materials with Módulo elástico of 185 GPa
	300.0 °C	175 GPa Show Material materials with Módulo elástico of 175 GPa
	400.0 °C	170 GPa Show Material materials with Módulo elástico of 170 GPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	500 J/(kg·K) Show Material materials with Calor específico of 500 J/(kg·K)
Coeficiente de dilatación térmica	100.0 °C	1.4E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.4E-5 1/K
	300.0 °C	1.44E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.44E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	16 W/(m·K) Show Material materials with Conductividad térmica of 16 W/(m·K)
Temperatura de fusión		1230 - 1480 °C Show Material materials with Temperatura de fusión of 1230 - 1480 °C	Typical for Austenitic Stainless Steel

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	8E-7 Ω·m Show Material materials with Resistividad eléctrica of 8E-7 Ω·m

Chemical properties

Property	Value
Aluminio	0.7 - 1.5 % Show Material materials with Aluminio of 0.7 - 1.5 %
Azufre	0.015 % Show Material materials with Azufre of 0.015 %
Carbono	0.1 % Show Material materials with Carbono of 0.1 %
Cromo	14 - 16 % Show Material materials with Cromo of 14 - 16 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	1.2 % Show Material materials with Manganeso of 1.2 %
Molibdeno	2 - 3 % Show Material materials with Molibdeno of 2 - 3 %
Níquel	6.5 - 7.8 % Show Material materials with Níquel of 6.5 - 7.8 %
Silicona	0.7 % Show Material materials with Silicona of 0.7 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10088-1 Grade X8CrNiMoAl15-7-2 precipitation hardened (P1550) on Matmatch