EN 10088-1 Grade X2CrNiMoN17-11-2 solution annealed (+AT)

Want to keep this datasheet? Save it now in your required format

Description

Material X2CrNiMoN17-11-2 is comparable to trademark X 2 CrNiMoN 17 12 2 acc. to DIN 17440 : 1985-07. This material is a fully austenitic steel which shows higher strength and structure stability owing to nitrogen addition. It has high resistance in oxidizing media. Increased pitting index owing to nitrogen. Application in chemical apparatus engineering for pressure tanks, in cellulose, color, oil, soap and textile industry, in breweries and dairies. The steel is suitable for mirror finishing and resistant to selective corrosion especially in welded condition. The material shows resistance to intercrystalline corrosion also in sensitized condition.

Related Standards

EN 10088-1

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.96 - 8 g/cm³ Show Material materials with Densidad of 7.96 - 8 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Austenitic Stainless Steel
Dureza Brinell	20.0 °C	250 [-] Show Material materials with Dureza Brinell of 250 [-]
Elongación	20.0 °C	40 % Show Material materials with Elongación of 40 %
Elongación A80 transversal	20.0 °C	40 % Show Material materials with Elongación A80 transversal of 40 %
Elongación transversal	20.0 °C	30 - 40 % Show Material materials with Elongación transversal of 30 - 40 %
Hardness, Brinell, trans	20.0 °C	250 [-] Show Material materials with Hardness, Brinell, trans of 250 [-]
Límite elástico Rp 0,2	20.0 °C	280 MPa Show Material materials with Límite elástico Rp 0,2 of 280 MPa
	100.0 °C	211 - 215 MPa Show Material materials with Límite elástico Rp 0,2 of 211 - 215 MPa
	150.0 °C	185 - 195 MPa Show Material materials with Límite elástico Rp 0,2 of 185 - 195 MPa
	200.0 °C	167 - 175 MPa Show Material materials with Límite elástico Rp 0,2 of 167 - 175 MPa
	250.0 °C	155 - 165 MPa Show Material materials with Límite elástico Rp 0,2 of 155 - 165 MPa
	300.0 °C	145 - 155 MPa Show Material materials with Límite elástico Rp 0,2 of 145 - 155 MPa
	350.0 °C	140 - 150 MPa Show Material materials with Límite elástico Rp 0,2 of 140 - 150 MPa
	400.0 °C	135 - 145 MPa Show Material materials with Límite elástico Rp 0,2 of 135 - 145 MPa
	450.0 °C	131 - 140 MPa Show Material materials with Límite elástico Rp 0,2 of 131 - 140 MPa
	500.0 °C	128 - 138 MPa Show Material materials with Límite elástico Rp 0,2 of 128 - 138 MPa
	550.0 °C	127 - 136 MPa Show Material materials with Límite elástico Rp 0,2 of 127 - 136 MPa

Límite elástico Rp 1,0	20.0 °C	315 MPa Show Material materials with Límite elástico Rp 1,0 of 315 MPa
	100.0 °C	245 - 246 MPa Show Material materials with Límite elástico Rp 1,0 of 245 - 246 MPa
	150.0 °C	218 - 225 MPa Show Material materials with Límite elástico Rp 1,0 of 218 - 225 MPa
	200.0 °C	198 - 205 MPa Show Material materials with Límite elástico Rp 1,0 of 198 - 205 MPa
	250.0 °C	183 - 195 MPa Show Material materials with Límite elástico Rp 1,0 of 183 - 195 MPa
	300.0 °C	175 - 185 MPa Show Material materials with Límite elástico Rp 1,0 of 175 - 185 MPa
	350.0 °C	169 - 180 MPa Show Material materials with Límite elástico Rp 1,0 of 169 - 180 MPa
	400.0 °C	164 - 175 MPa Show Material materials with Límite elástico Rp 1,0 of 164 - 175 MPa
	450.0 °C	160 - 170 MPa Show Material materials with Límite elástico Rp 1,0 of 160 - 170 MPa
	500.0 °C	158 - 168 MPa Show Material materials with Límite elástico Rp 1,0 of 158 - 168 MPa
	550.0 °C	157 - 166 MPa Show Material materials with Límite elástico Rp 1,0 of 157 - 166 MPa
	Unlock all property charts
Límite elástico transversal Rp 0,2	20.0 °C	280 - 300 MPa Show Material materials with Límite elástico transversal Rp 0,2 of 280 - 300 MPa
Límite elástico transversal Rp 1,0	20.0 °C	315 MPa Show Material materials with Límite elástico transversal Rp 1,0 of 315 MPa
Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Austenitic Stainless Steel
Módulo elástico	-100.0 °C	206 GPa Show Material materials with Módulo elástico of 206 GPa
	20.0 °C	196 - 200 GPa Show Material materials with Módulo elástico of 196 - 200 GPa
	100.0 °C	190 - 194 GPa Show Material materials with Módulo elástico of 190 - 194 GPa
	200.0 °C	182 - 186 GPa Show Material materials with Módulo elástico of 182 - 186 GPa
	300.0 °C	174 - 179 GPa Show Material materials with Módulo elástico of 174 - 179 GPa
	400.0 °C	166 - 172 GPa Show Material materials with Módulo elástico of 166 - 172 GPa
	500.0 °C	158 - 165 GPa Show Material materials with Módulo elástico of 158 - 165 GPa
	600.0 °C	150 GPa Show Material materials with Módulo elástico of 150 GPa
	700.0 °C	142 GPa Show Material materials with Módulo elástico of 142 GPa
	800.0 °C	134 GPa Show Material materials with Módulo elástico of 134 GPa
	900.0 °C	127 GPa Show Material materials with Módulo elástico of 127 GPa
	1000.0 °C	120 GPa Show Material materials with Módulo elástico of 120 GPa
	Unlock all property charts
Resistencia a la tracción	20.0 °C	580 - 800 MPa Show Material materials with Resistencia a la tracción of 580 - 800 MPa
Resistencia a la tracción transversal	20.0 °C	580 - 800 MPa Show Material materials with Resistencia a la tracción transversal of 580 - 800 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	-100.0 °C	440 J/(kg·K) Show Material materials with Calor específico of 440 J/(kg·K)
	20.0 °C	472 - 500 J/(kg·K) Show Material materials with Calor específico of 472 - 500 J/(kg·K)
	100.0 °C	487 J/(kg·K) Show Material materials with Calor específico of 487 J/(kg·K)
	200.0 °C	503 J/(kg·K) Show Material materials with Calor específico of 503 J/(kg·K)
	300.0 °C	512 J/(kg·K) Show Material materials with Calor específico of 512 J/(kg·K)
	400.0 °C	520 J/(kg·K) Show Material materials with Calor específico of 520 J/(kg·K)
	500.0 °C	530 J/(kg·K) Show Material materials with Calor específico of 530 J/(kg·K)
	600.0 °C	541 J/(kg·K) Show Material materials with Calor específico of 541 J/(kg·K)
	700.0 °C	551 J/(kg·K) Show Material materials with Calor específico of 551 J/(kg·K)
	800.0 °C	559 J/(kg·K) Show Material materials with Calor específico of 559 J/(kg·K)
	900.0 °C	565 J/(kg·K) Show Material materials with Calor específico of 565 J/(kg·K)
	1000.0 °C	571 J/(kg·K) Show Material materials with Calor específico of 571 J/(kg·K)
	Unlock all property charts
Coeficiente de dilatación térmica	-100.0 °C	1.49E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.49E-5 1/K
	20.0 °C	1.61E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.61E-5 1/K
	100.0 °C	1.6E-5 - 1.67E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.6E-5 - 1.67E-5 1/K
	200.0 °C	1.65E-5 - 1.72E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.65E-5 - 1.72E-5 1/K
	300.0 °C	1.7E-5 - 1.77E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.7E-5 - 1.77E-5 1/K
	400.0 °C	1.75E-5 - 1.81E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.75E-5 - 1.81E-5 1/K
	500.0 °C	1.8E-5 - 1.84E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.8E-5 - 1.84E-5 1/K
	600.0 °C	1.88E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.88E-5 1/K
	700.0 °C	1.91E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.91E-5 1/K
	800.0 °C	1.94E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.94E-5 1/K
	900.0 °C	1.97E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.97E-5 1/K
	1000.0 °C	2E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	13.3 - 15 W/(m·K) Show Material materials with Conductividad térmica of 13.3 - 15 W/(m·K)
	100.0 °C	14.9 W/(m·K) Show Material materials with Conductividad térmica of 14.9 W/(m·K)
	200.0 °C	16.5 W/(m·K) Show Material materials with Conductividad térmica of 16.5 W/(m·K)
	300.0 °C	18.1 W/(m·K) Show Material materials with Conductividad térmica of 18.1 W/(m·K)
	400.0 °C	19.5 W/(m·K) Show Material materials with Conductividad térmica of 19.5 W/(m·K)
	500.0 °C	21 W/(m·K) Show Material materials with Conductividad térmica of 21 W/(m·K)
	600.0 °C	22.4 W/(m·K) Show Material materials with Conductividad térmica of 22.4 W/(m·K)
	700.0 °C	23.8 W/(m·K) Show Material materials with Conductividad térmica of 23.8 W/(m·K)
	800.0 °C	25.2 W/(m·K) Show Material materials with Conductividad térmica of 25.2 W/(m·K)
	Unlock all property charts
Difusividad térmica	20.0 °C	3.5 mm²/s Show Material materials with Difusividad térmica of 3.5 mm²/s
	100.0 °C	3.8 mm²/s Show Material materials with Difusividad térmica of 3.8 mm²/s
	200.0 °C	4 mm²/s Show Material materials with Difusividad térmica of 4 mm²/s
	300.0 °C	4.3 mm²/s Show Material materials with Difusividad térmica of 4.3 mm²/s
	400.0 °C	4.5 mm²/s Show Material materials with Difusividad térmica of 4.5 mm²/s
	500.0 °C	4.7 mm²/s Show Material materials with Difusividad térmica of 4.7 mm²/s
	600.0 °C	4.8 mm²/s Show Material materials with Difusividad térmica of 4.8 mm²/s
	700.0 °C	5.1 mm²/s Show Material materials with Difusividad térmica of 5.1 mm²/s
	800.0 °C	5.4 mm²/s Show Material materials with Difusividad térmica of 5.4 mm²/s
	Unlock all property charts
Temperatura de fusión		1230 - 1480 °C Show Material materials with Temperatura de fusión of 1230 - 1480 °C	Typical for Austenitic Stainless Steel

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	7.5E-7 - 7.91E-7 Ω·m Show Material materials with Resistividad eléctrica of 7.5E-7 - 7.91E-7 Ω·m
	100.0 °C	8.45E-7 Ω·m Show Material materials with Resistividad eléctrica of 8.45E-7 Ω·m
	200.0 °C	9.19E-7 Ω·m Show Material materials with Resistividad eléctrica of 9.19E-7 Ω·m
	300.0 °C	9.77E-7 Ω·m Show Material materials with Resistividad eléctrica of 9.77E-7 Ω·m
	400.0 °C	1.03E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.03E-6 Ω·m
	500.0 °C	1.08E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.08E-6 Ω·m
	600.0 °C	1.12E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.12E-6 Ω·m
	700.0 °C	1.15E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.15E-6 Ω·m
	800.0 °C	1.18E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.18E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Azufre	0.015 % Show Material materials with Azufre of 0.015 %
Carbono	0.03 % Show Material materials with Carbono of 0.03 %
Cromo	16.5 - 18.5 % Show Material materials with Cromo of 16.5 - 18.5 %
Fósforo	0.05 % Show Material materials with Fósforo of 0.05 %
Manganeso	2 % Show Material materials with Manganeso of 2 %
Molibdeno	2 - 2.5 % Show Material materials with Molibdeno of 2 - 2.5 %
Nitrógeno	0.12 - 0.22 % Show Material materials with Nitrógeno of 0.12 - 0.22 %
Níquel	10 - 12.5 % Show Material materials with Níquel of 10 - 12.5 %
Silicona	1 % Show Material materials with Silicona of 1 %

Looking for suppliers of this material? Click to see 2 supplier of EN 10088-1 Grade X2CrNiMoN17-11-2 solution annealed (+AT) on Matmatch