EN 10088-1 Grade X1NiCrMoCu31-27-4 solution annealed (+AT)

Want to keep this datasheet? Save it now in your required format

Description

The highly corrosion resistant austenitic material X1NiCrMoCu31-27-4, mat. number 1.4563, is comparable to X 1 NiCrMoCu 31 27 4 acc. to SEW 400 : 1991-02 (invalid, replaced by edition SEW 400 : 1997-02 where this trademark is not contained anymore). The rolled and forged steel is applicable acc. to VdTÜV-material specification 483 : 1996-06 for pressure vessels acc. to TRB 100 and AD-data sheet W 2 and W 10 from -196 to 550 °C., for steam boilers as per TRD 101, TRD 102 and TRD 107 up to 550 °C. as well as for pressure gas vessels acc. TRG 201 and TRG 203 from -196 to 550 °C. Further application in nuclear power engineering as far as nuclear regulations or object-related specifications permit use from -196 to 550 °C. The material is resistant to intercrystalline corrosion up to 400 °C. both in delivery and welded condition. It shows very good resistance to stress corrosion, pitting and crevice corrosion in chloride containing media as well as good resistance to organic and inorganic acids. This material is cold and warm formable. It is within the examined dimensional range fusion weldable by metal arc welding with covered rod electrodes and TIG-welding. Preheating and heat treatment are for material reasosns not necessary. The intermediate temperature should not exceed 150 °C. for thicknesses to be welded of up to 30 mm and 100 °C. for higher thicknesses. Related or higher alloyed welding additions should be preferred with regard to the special corrosion properties of the material (e.g. welding additions acc. to VdTÜV-Wbl 1153).

Related Standards

EN 10088-1

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8 - 8.08 g/cm³ Show Material materials with Densidad of 8 - 8.08 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Austenitic Stainless Steel
Dureza Brinell	20.0 °C	230 [-] Show Material materials with Dureza Brinell of 230 [-]
Elongación	20.0 °C	20 - 35 % Show Material materials with Elongación of 20 - 35 %
Elongación A80 transversal	20.0 °C	40 % Show Material materials with Elongación A80 transversal of 40 %
Elongación transversal	20.0 °C	30 - 40 % Show Material materials with Elongación transversal of 30 - 40 %
Hardness, Brinell, trans	20.0 °C	230 [-] Show Material materials with Hardness, Brinell, trans of 230 [-]
Límite elástico Rp 0,2	20.0 °C	220 MPa Show Material materials with Límite elástico Rp 0,2 of 220 MPa
	100.0 °C	190 MPa Show Material materials with Límite elástico Rp 0,2 of 190 MPa
	150.0 °C	175 MPa Show Material materials with Límite elástico Rp 0,2 of 175 MPa
	200.0 °C	160 MPa Show Material materials with Límite elástico Rp 0,2 of 160 MPa
	250.0 °C	155 MPa Show Material materials with Límite elástico Rp 0,2 of 155 MPa
	300.0 °C	150 MPa Show Material materials with Límite elástico Rp 0,2 of 150 MPa
	350.0 °C	145 MPa Show Material materials with Límite elástico Rp 0,2 of 145 MPa
	400.0 °C	135 MPa Show Material materials with Límite elástico Rp 0,2 of 135 MPa
	450.0 °C	125 MPa Show Material materials with Límite elástico Rp 0,2 of 125 MPa
	500.0 °C	120 MPa Show Material materials with Límite elástico Rp 0,2 of 120 MPa
	550.0 °C	115 MPa Show Material materials with Límite elástico Rp 0,2 of 115 MPa

Límite elástico Rp 1,0	20.0 °C	250 MPa Show Material materials with Límite elástico Rp 1,0 of 250 MPa
	100.0 °C	220 MPa Show Material materials with Límite elástico Rp 1,0 of 220 MPa
	150.0 °C	205 MPa Show Material materials with Límite elástico Rp 1,0 of 205 MPa
	200.0 °C	190 MPa Show Material materials with Límite elástico Rp 1,0 of 190 MPa
	250.0 °C	185 MPa Show Material materials with Límite elástico Rp 1,0 of 185 MPa
	300.0 °C	180 MPa Show Material materials with Límite elástico Rp 1,0 of 180 MPa
	350.0 °C	175 MPa Show Material materials with Límite elástico Rp 1,0 of 175 MPa
	400.0 °C	165 MPa Show Material materials with Límite elástico Rp 1,0 of 165 MPa
	450.0 °C	155 MPa Show Material materials with Límite elástico Rp 1,0 of 155 MPa
	500.0 °C	150 MPa Show Material materials with Límite elástico Rp 1,0 of 150 MPa
	550.0 °C	145 MPa Show Material materials with Límite elástico Rp 1,0 of 145 MPa
	Unlock all property charts
Límite elástico transversal Rp 0,2	20.0 °C	220 MPa Show Material materials with Límite elástico transversal Rp 0,2 of 220 MPa
Límite elástico transversal Rp 1,0	20.0 °C	250 - 260 MPa Show Material materials with Límite elástico transversal Rp 1,0 of 250 - 260 MPa
Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Austenitic Stainless Steel
Módulo elástico	20.0 °C	191 - 195 GPa Show Material materials with Módulo elástico of 191 - 195 GPa
	100.0 °C	186 - 190 GPa Show Material materials with Módulo elástico of 186 - 190 GPa
	200.0 °C	179 - 182 GPa Show Material materials with Módulo elástico of 179 - 182 GPa
	300.0 °C	172 - 174 GPa Show Material materials with Módulo elástico of 172 - 174 GPa
	400.0 °C	166 GPa Show Material materials with Módulo elástico of 166 GPa
	500.0 °C	158 - 159 GPa Show Material materials with Módulo elástico of 158 - 159 GPa
	Unlock all property charts
Resistencia a la tracción	20.0 °C	500 - 1100 MPa Show Material materials with Resistencia a la tracción of 500 - 1100 MPa
Resistencia a la tracción transversal	20.0 °C	500 - 750 MPa Show Material materials with Resistencia a la tracción transversal of 500 - 750 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	450 - 452 J/(kg·K) Show Material materials with Calor específico of 450 - 452 J/(kg·K)
	100.0 °C	463 J/(kg·K) Show Material materials with Calor específico of 463 J/(kg·K)
	200.0 °C	474 J/(kg·K) Show Material materials with Calor específico of 474 J/(kg·K)
	300.0 °C	483 J/(kg·K) Show Material materials with Calor específico of 483 J/(kg·K)
	400.0 °C	491 J/(kg·K) Show Material materials with Calor específico of 491 J/(kg·K)
	500.0 °C	500 J/(kg·K) Show Material materials with Calor específico of 500 J/(kg·K)
	Unlock all property charts
Coeficiente de dilatación térmica	100.0 °C	1.51E-5 - 1.58E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.51E-5 - 1.58E-5 1/K
	200.0 °C	1.55E-5 - 1.61E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.55E-5 - 1.61E-5 1/K
	300.0 °C	1.58E-5 - 1.65E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.58E-5 - 1.65E-5 1/K
	400.0 °C	1.62E-5 - 1.69E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.62E-5 - 1.69E-5 1/K
	500.0 °C	1.66E-5 - 1.73E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.66E-5 - 1.73E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	11.7 - 12 W/(m·K) Show Material materials with Conductividad térmica of 11.7 - 12 W/(m·K)
	100.0 °C	13.2 W/(m·K) Show Material materials with Conductividad térmica of 13.2 W/(m·K)
	200.0 °C	15 W/(m·K) Show Material materials with Conductividad térmica of 15 W/(m·K)
	300.0 °C	16.8 W/(m·K) Show Material materials with Conductividad térmica of 16.8 W/(m·K)
	400.0 °C	18.5 W/(m·K) Show Material materials with Conductividad térmica of 18.5 W/(m·K)
	500.0 °C	20.2 W/(m·K) Show Material materials with Conductividad térmica of 20.2 W/(m·K)
	Unlock all property charts
Difusividad térmica	20.0 °C	3.2 mm²/s Show Material materials with Difusividad térmica of 3.2 mm²/s
	100.0 °C	3.5 mm²/s Show Material materials with Difusividad térmica of 3.5 mm²/s
	200.0 °C	3.8 mm²/s Show Material materials with Difusividad térmica of 3.8 mm²/s
	300.0 °C	4.1 mm²/s Show Material materials with Difusividad térmica of 4.1 mm²/s
	400.0 °C	4.5 mm²/s Show Material materials with Difusividad térmica of 4.5 mm²/s
	500.0 °C	4.8 mm²/s Show Material materials with Difusividad térmica of 4.8 mm²/s
	Unlock all property charts
Temperatura de fusión		1230 - 1480 °C Show Material materials with Temperatura de fusión of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Temperatura máx. de funcionamiento, largo		-196 - 550 °C Show Material materials with Temperatura máx. de funcionamiento, largo of -196 - 550 °C

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	1E-6 - 1.04E-6 Ω·m Show Material materials with Resistividad eléctrica of 1E-6 - 1.04E-6 Ω·m
	100.0 °C	1.07E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.07E-6 Ω·m
	200.0 °C	1.1E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.1E-6 Ω·m
	300.0 °C	1.13E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.13E-6 Ω·m
	400.0 °C	1.16E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.16E-6 Ω·m
	500.0 °C	1.18E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.18E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Azufre	0.01 % Show Material materials with Azufre of 0.01 %
Carbono	0.02 % Show Material materials with Carbono of 0.02 %
Cobre	0.7 - 1.5 % Show Material materials with Cobre of 0.7 - 1.5 %
Cromo	26 - 28 % Show Material materials with Cromo of 26 - 28 %
Fósforo	0.03 % Show Material materials with Fósforo of 0.03 %
Manganeso	2 % Show Material materials with Manganeso of 2 %
Molibdeno	3 - 4 % Show Material materials with Molibdeno of 3 - 4 %
Nitrógeno	0.11 % Show Material materials with Nitrógeno of 0.11 %
Níquel	30 - 32 % Show Material materials with Níquel of 30 - 32 %
Silicona	0.7 % Show Material materials with Silicona of 0.7 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10088-1 Grade X1NiCrMoCu31-27-4 solution annealed (+AT) on Matmatch