DIN 17480 Grade X 45 CrNiW 18 9 solution heat-treated and precipitation hardened (+AT+P)

Want to keep this datasheet? Save it now in your required format

Description

X45CrNiW18-9 is an austenitic Cr-Ni-W-alloyed valve steel. The steel shows sufficient corrosion resistance in exhaust condensate and good resistance to lead compounds at increased temperatures. Application at operating temperatures up to 730 deg. Use: exhaust valves, valves

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

7.9 g/cm³

Show Material materials with Densidad of 7.9 g/cm³

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Austenitic Stainless Steel

Límite elástico Rp 0,2

500.0 °C

250 MPa

Show Material materials with Límite elástico Rp 0,2 of 250 MPa

550.0 °C

230 MPa

Show Material materials with Límite elástico Rp 0,2 of 230 MPa

600.0 °C

210 MPa

Show Material materials with Límite elástico Rp 0,2 of 210 MPa

650.0 °C

190 MPa

Show Material materials with Límite elástico Rp 0,2 of 190 MPa

700.0 °C

170 MPa

Show Material materials with Límite elástico Rp 0,2 of 170 MPa

750.0 °C

140 MPa

Show Material materials with Límite elástico Rp 0,2 of 140 MPa

800.0 °C

100 MPa

Show Material materials with Límite elástico Rp 0,2 of 100 MPa

Módulo de cizallamiento

23.0 °C

77 GPa

Show Material materials with Módulo de cizallamiento of 77 GPa

Typical for Austenitic Stainless Steel

Módulo elástico

20.0 °C

205 GPa

Show Material materials with Módulo elástico of 205 GPa

Resistencia a la tracción

500.0 °C

600 MPa

Show Material materials with Resistencia a la tracción of 600 MPa

550.0 °C

550 MPa

Show Material materials with Resistencia a la tracción of 550 MPa

600.0 °C

500 MPa

Show Material materials with Resistencia a la tracción of 500 MPa

650.0 °C

410 MPa

Show Material materials with Resistencia a la tracción of 410 MPa

700.0 °C

350 MPa

Show Material materials with Resistencia a la tracción of 350 MPa

750.0 °C

270 MPa

Show Material materials with Resistencia a la tracción of 270 MPa

800.0 °C

180 MPa

Show Material materials with Resistencia a la tracción of 180 MPa

Unlock all property charts

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

20.0 °C

500 J/(kg·K)

Show Material materials with Calor específico of 500 J/(kg·K)

Coeficiente de dilatación térmica

100.0 °C

1.55E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.55E-5 1/K

300.0 °C

1.75E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.75E-5 1/K

500.0 °C

1.82E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.82E-5 1/K

700.0 °C

1.86E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.86E-5 1/K

Unlock all property charts

Conductividad térmica

20.0 °C

14.5 W/(m·K)

Show Material materials with Conductividad térmica of 14.5 W/(m·K)

Temperatura de fusión

1230 - 1480 °C

Show Material materials with Temperatura de fusión of 1230 - 1480 °C

Typical for Austenitic Stainless Steel

Temperatura máx. de funcionamiento, largo

0 - 730 °C

Show Material materials with Temperatura máx. de funcionamiento, largo of 0 - 730 °C

Eléctrico

PropertyTemperatureValueComment

Resistividad eléctrica

23.0 °C

8.5E-7 Ω·m

Show Material materials with Resistividad eléctrica of 8.5E-7 Ω·m

Typical for Austenitic Stainless Steel

Chemical properties

PropertyValue

Azufre

0.03 %

Show Material materials with Azufre of 0.03 %

Carbono

0.4 - 0.5 %

Show Material materials with Carbono of 0.4 - 0.5 %

Cromo

17 - 19 %

Show Material materials with Cromo of 17 - 19 %

Fósforo

0.05 %

Show Material materials with Fósforo of 0.05 %

Manganeso

0.8 - 1.5 %

Show Material materials with Manganeso of 0.8 - 1.5 %

Níquel

8 - 10 %

Show Material materials with Níquel of 8 - 10 %

Silicona

2 - 3 %

Show Material materials with Silicona of 2 - 3 %

Wolframio

0.8 - 1.2 %

Show Material materials with Wolframio of 0.8 - 1.2 %