DIN 17730 Grade G-Ni95 cast condition

Want to keep this datasheet? Save it now in your required format

Description

G-Ni95 possesses good corrosion-resistance to non-oxidizing mediums. The material shows very good resistance to hot and concentrated caustic alkalies as well as to dry gases, e.g. chlorine. G-Ni95 is applied in the chemical industry and in the food industry, for valves and fittings, apparatus parts, pumps, shut-off devices and the like. Processing properties: Weldability: limited weldability.

Related Standards

DIN 17730

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.3 g/cm³ Show Material materials with Densidad of 8.3 g/cm³

Mecánica

Property	Temperature	Value
Dureza Brinell	20.0 °C	80 [-] Show Material materials with Dureza Brinell of 80 [-]
Elongación	20.0 °C	12 % Show Material materials with Elongación of 12 %
Límite elástico Rp 0,2	20.0 °C	120 MPa Show Material materials with Límite elástico Rp 0,2 of 120 MPa
Módulo elástico	20.0 °C	152 GPa Show Material materials with Módulo elástico of 152 GPa
Resistencia a la tracción	20.0 °C	320 MPa Show Material materials with Resistencia a la tracción of 320 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	430 - 532 J/(kg·K) Show Material materials with Calor específico of 430 - 532 J/(kg·K)	Typical for Pure/Low Nickel Alloy
Coeficiente de dilatación térmica	23.0 °C	8.5E-6 - 1.4E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 8.5E-6 - 1.4E-5 1/K	Typical for Pure/Low Nickel Alloy
Conductividad térmica	23.0 °C	18 - 86 W/(m·K) Show Material materials with Conductividad térmica of 18 - 86 W/(m·K)	Typical for Pure/Low Nickel Alloy
Temperatura de fusión		1400 - 1500 °C Show Material materials with Temperatura de fusión of 1400 - 1500 °C	Typical for Pure/Low Nickel Alloy

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	2.85E-7 Ω·m Show Material materials with Resistividad eléctrica of 2.85E-7 Ω·m

Chemical properties

Property	Value
Carbono	1 % Show Material materials with Carbono of 1 %
Cobre	1.2 % Show Material materials with Cobre of 1.2 %
Hierro	1 % Show Material materials with Hierro of 1 %
Manganeso	1.5 % Show Material materials with Manganeso of 1.5 %
Níquel	95 % Show Material materials with Níquel of 95 %
Silicona	2 % Show Material materials with Silicona of 2 %

Technological properties

Property
Processing methods	sand casting, separately cast test sample