DIN 17730 Grade G-NiCu30Nb cast condition

Want to keep this datasheet? Save it now in your required format

Description

The cast material G-NiCu30Nb shows very good resistance to sea water and possesses good corrosion properties against non-oxidizing inorganic acids, especially against sulphuric, hydrofluoric and phosphorous acid, against most organic acids and against alkaline solutions. Furthermore, the material is of excellent resistance to erosion and cavitation. It is the only Ni-Cu-cast material with good weldability. Unlike the nickel-copper materials that are alloyed with silicium, G-NiCu30Nb shows substantially lower strength properties. The material is applied in the shipbuilding, in the chemical industry, in the paper and food industry, for pickling plants, washing machines, as castings for pumps and pump components, fittings, valves and valve seats, nozzles, turbine blades, guide rails, sliding elements and bearings. The casting is well suitable for stress in terms of pressure-tightness.

Related Standards

DIN 17730

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.6 g/cm³ Show Material materials with Densidad of 8.6 g/cm³

Mecánica

Property	Temperature	Value	Comment
Dureza Brinell	20.0 °C	120 [-] Show Material materials with Dureza Brinell of 120 [-]
Elongación	20.0 °C	25 % Show Material materials with Elongación of 25 %
Límite elástico Rp 0,2	20.0 °C	220 MPa Show Material materials with Límite elástico Rp 0,2 of 220 MPa
Módulo elástico	23.0 °C	120 - 156 GPa Show Material materials with Módulo elástico of 120 - 156 GPa	Typical for Nickel Copper Alloy
Resistencia a la tracción	20.0 °C	450 MPa Show Material materials with Resistencia a la tracción of 450 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	418 - 540 J/(kg·K) Show Material materials with Calor específico of 418 - 540 J/(kg·K)	Typical for Nickel Copper Alloy
Coeficiente de dilatación térmica	23.0 °C	1.1E-5 - 1.6E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.1E-5 - 1.6E-5 1/K	Typical for Nickel Copper Alloy
Conductividad térmica	23.0 °C	16 - 45 W/(m·K) Show Material materials with Conductividad térmica of 16 - 45 W/(m·K)	Typical for Nickel Copper Alloy
Temperatura de fusión		1170 - 1365 °C Show Material materials with Temperatura de fusión of 1170 - 1365 °C	Typical for Nickel Copper Alloy

Chemical properties

Property	Value
Aluminio	0.5 % Show Material materials with Aluminio of 0.5 %
Azufre	0.01 % Show Material materials with Azufre of 0.01 %
Carbono	0.15 % Show Material materials with Carbono of 0.15 %
Cobre	26 - 33 % Show Material materials with Cobre of 26 - 33 %
Hierro	1 - 2.5 % Show Material materials with Hierro of 1 - 2.5 %
Magnesio	0.12 % Show Material materials with Magnesio of 0.12 %
Manganeso	0.5 - 1.5 % Show Material materials with Manganeso of 0.5 - 1.5 %
Niobio	1 - 1.5 % Show Material materials with Niobio of 1 - 1.5 %
Níquel	62 - 68 % Show Material materials with Níquel of 62 - 68 %
Plomo	0.01 % Show Material materials with Plomo of 0.01 %
Silicona	0.5 - 1.5 % Show Material materials with Silicona of 0.5 - 1.5 %
Titanio	0.2 % Show Material materials with Titanio of 0.2 %

Technological properties

Property
Processing methods	sand casting, separately cast test sample