SEW 087 Grade 9 CrNiCu P 324 normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

9 CrNiCu P 324 is used for welded, screwed and riveted constructions of different kind, e. g. structural engineering, bridge building, container construction. The strength is equal to the St 52-3 (DIN 17100). The steel is good weldable and formable.

Related Standards

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.8 g/cm³

Show Material materials with Densidad of 7.8 g/cm³

Typical for Steel

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Steel

Elongación

20.0 °C

22 %

Show Material materials with Elongación of 22 %

Límite elástico

20.0 °C

355 MPa

Show Material materials with Límite elástico of 355 MPa

Límite elástico Rp 0,2

100.0 °C

255 MPa

Show Material materials with Límite elástico Rp 0,2 of 255 MPa

200.0 °C

226 MPa

Show Material materials with Límite elástico Rp 0,2 of 226 MPa

250.0 °C

206 MPa

Show Material materials with Límite elástico Rp 0,2 of 206 MPa

300.0 °C

186 MPa

Show Material materials with Límite elástico Rp 0,2 of 186 MPa

Módulo elástico

23.0 °C

190 - 210 GPa

Show Material materials with Módulo elástico of 190 - 210 GPa

Typical for Steel

Resistencia a la tracción

20.0 °C

510 - 610 MPa

Show Material materials with Resistencia a la tracción of 510 - 610 MPa

Chemical properties

PropertyValue

Azufre

0.035 %

Show Material materials with Azufre of 0.035 %

Carbono

0.12 %

Show Material materials with Carbono of 0.12 %

Cobre

0.25 - 0.55 %

Show Material materials with Cobre of 0.25 - 0.55 %

Cromo

0.5 - 1.25 %

Show Material materials with Cromo of 0.5 - 1.25 %

Fósforo

0.07 - 0.15 %

Show Material materials with Fósforo of 0.07 - 0.15 %

Manganeso

0.2 - 0.5 %

Show Material materials with Manganeso of 0.2 - 0.5 %

Níquel

0.65 %

Show Material materials with Níquel of 0.65 %

Silicona

0.25 - 0.75 %

Show Material materials with Silicona of 0.25 - 0.75 %