SAE J158 Grade M4504 Air quenched and Tempered

Want to keep this datasheet? Save it now in your required format

Description

Malleable iron is a cast iron in which the graphite is present as temper carbon nodules, instead of flakes as gray iron or spherulites as in ductile iron. M4505 is used where slightly higher strength and hardness than M3210 is needed.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por SAE.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.2 - 7.34 g/cm³

Show Material materials with Densidad of 7.2 - 7.34 g/cm³

Typical for Malleable Cast Iron

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.27 [-]

Show Material materials with Coeficiente de Poisson of 0.27 [-]

Typical for Malleable Cast Iron

Dureza Brinell

23.0 °C

163 - 217 [-]

Show Material materials with Dureza Brinell of 163 - 217 [-]

Elongación

23.0 °C

4 %

Show Material materials with Elongación of 4 %

Límite elástico

23.0 °C

310 MPa

Show Material materials with Límite elástico of 310 MPa

Módulo de cizallamiento

23.0 °C

64 GPa

Show Material materials with Módulo de cizallamiento of 64 GPa

Typical for Malleable Cast Iron

Módulo elástico

23.0 °C

172 GPa

Show Material materials with Módulo elástico of 172 GPa

Resistencia a la tracción

23.0 °C

448 MPa

Show Material materials with Resistencia a la tracción of 448 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

460 - 527 J/(kg·K)

Show Material materials with Calor específico of 460 - 527 J/(kg·K)

Typical for Malleable Cast Iron

Coeficiente de dilatación térmica

23.0 °C

1E-5 - 1.4E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.4E-5 1/K

Typical for Malleable Cast Iron

Conductividad térmica

23.0 °C

51 W/(m·K)

Show Material materials with Conductividad térmica of 51 W/(m·K)

Typical for Malleable Cast Iron

Temperatura de fusión

1120 °C

Show Material materials with Temperatura de fusión of 1120 °C

Typical for Cast Iron

Chemical properties

PropertyValueComment

Azufre

0.02 - 0.2 %

Show Material materials with Azufre of 0.02 - 0.2 %

Carbono

2.2 - 2.9 %

Show Material materials with Carbono of 2.2 - 2.9 %

Fósforo

0.02 - 0.1 %

Show Material materials with Fósforo of 0.02 - 0.1 %

Hierro

93.6 - 96.71 %

Show Material materials with Hierro of 93.6 - 96.71 %

balance

Manganeso

0.15 - 1.25 %

Show Material materials with Manganeso of 0.15 - 1.25 %

Silicona

0.9 - 1.9 %

Show Material materials with Silicona of 0.9 - 1.9 %

Technological properties

Property
Application areas

Certain compressor crankshafts and hubs

Processing history

as agreed