SAE J158 Grade M5503 Liquid quenched and Tempered

Want to keep this datasheet? Save it now in your required format

Description

Malleable iron is a cast iron in which the graphite is present as temper carbon nodules, instead of flakes as gray iron or spherulites as in ductile iron. M5503 is used where better machinability and/or improved response to induction hardening than M5003 are necessary for parts requiring moderate strength.

Related Standards

SAE J158

Equivalent Materials

AISI M5503

Los datos sobre este material han sido proporcionados por SAE.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	7.2 - 7.34 g/cm³ Show Material materials with Densidad of 7.2 - 7.34 g/cm³	Typical for Malleable Cast Iron

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.27 [-] Show Material materials with Coeficiente de Poisson of 0.27 [-]	Typical for Malleable Cast Iron
Dureza Brinell	23.0 °C	187 - 241 [-] Show Material materials with Dureza Brinell of 187 - 241 [-]
Elongación	23.0 °C	3 % Show Material materials with Elongación of 3 %
Límite elástico	23.0 °C	379 MPa Show Material materials with Límite elástico of 379 MPa
Módulo de cizallamiento	23.0 °C	64 GPa Show Material materials with Módulo de cizallamiento of 64 GPa	Typical for Malleable Cast Iron
Módulo elástico	23.0 °C	179 GPa Show Material materials with Módulo elástico of 179 GPa
Resistencia a la tracción	23.0 °C	517 MPa Show Material materials with Resistencia a la tracción of 517 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	460 - 527 J/(kg·K) Show Material materials with Calor específico of 460 - 527 J/(kg·K)	Typical for Malleable Cast Iron
Coeficiente de dilatación térmica	23.0 °C	1E-5 - 1.4E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.4E-5 1/K	Typical for Malleable Cast Iron
Conductividad térmica	23.0 °C	51 W/(m·K) Show Material materials with Conductividad térmica of 51 W/(m·K)	Typical for Malleable Cast Iron
Temperatura de fusión		1120 °C Show Material materials with Temperatura de fusión of 1120 °C	Typical for Cast Iron

Chemical properties

Property	Value	Comment
Azufre	0.02 - 0.2 % Show Material materials with Azufre of 0.02 - 0.2 %
Carbono	2.2 - 2.9 % Show Material materials with Carbono of 2.2 - 2.9 %
Fósforo	0.02 - 0.1 % Show Material materials with Fósforo of 0.02 - 0.1 %
Hierro	93.6 - 96.71 % Show Material materials with Hierro of 93.6 - 96.71 %	balance
Manganeso	0.15 - 1.25 % Show Material materials with Manganeso of 0.15 - 1.25 %
Silicona	0.9 - 1.9 % Show Material materials with Silicona of 0.9 - 1.9 %

Technological properties

Property
Application areas	Parts requiring moderate strength.
Processing history	as agreed