EN 10213-4 Grade GX5CrNiMo19-11-2 solution heat-treated and quenched

Want to keep this datasheet? Save it now in your required format

Description

Material GX5CrNiMo19-11-2 is equivalent to trademark G-X6 CrNiMo 18 10 acc. to DIN 17445-84. This material is used for fittings, pumps, agitators, filters and tanks in chemical industry, textile, viscose and cellulose industry. It is weldable without preheating. It is unsuitable for corrosion application where smaller welds would basically require a heat treatment.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.9 g/cm³ Show Material materials with Densidad of 7.9 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Austenitic Stainless Steel
Elongación	20.0 °C	30 % Show Material materials with Elongación of 30 %
Límite elástico Rp 1,0	20.0 °C	210 MPa Show Material materials with Límite elástico Rp 1,0 of 210 MPa
	100.0 °C	170 MPa Show Material materials with Límite elástico Rp 1,0 of 170 MPa
	200.0 °C	135 MPa Show Material materials with Límite elástico Rp 1,0 of 135 MPa
	300.0 °C	115 MPa Show Material materials with Límite elástico Rp 1,0 of 115 MPa
	400.0 °C	105 MPa Show Material materials with Límite elástico Rp 1,0 of 105 MPa

Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Austenitic Stainless Steel
Módulo elástico	23.0 °C	195 GPa Show Material materials with Módulo elástico of 195 GPa	Typical for Austenitic Stainless Steel
Resistencia a la tracción	20.0 °C	440 - 640 MPa Show Material materials with Resistencia a la tracción of 440 - 640 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	530 J/(kg·K) Show Material materials with Calor específico of 530 J/(kg·K)
Coeficiente de dilatación térmica	100.0 °C	1.58E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.58E-5 1/K
	300.0 °C	1.7E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.7E-5 1/K
	500.0 °C	1.77E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.77E-5 1/K
	Unlock all property charts
Conductividad térmica	50.0 °C	14.5 W/(m·K) Show Material materials with Conductividad térmica of 14.5 W/(m·K)
	100.0 °C	15.8 W/(m·K) Show Material materials with Conductividad térmica of 15.8 W/(m·K)
	Unlock all property charts
Temperatura de fusión		1230 - 1480 °C Show Material materials with Temperatura de fusión of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Temperatura máx. de funcionamiento, largo		-196 - 550 °C Show Material materials with Temperatura máx. de funcionamiento, largo of -196 - 550 °C

Eléctrico

Property	Temperature	Value	Comment
Resistividad eléctrica	23.0 °C	8.5E-7 Ω·m Show Material materials with Resistividad eléctrica of 8.5E-7 Ω·m	Typical for Austenitic Stainless Steel

Chemical properties

Property	Value
Azufre	0.03 % Show Material materials with Azufre of 0.03 %
Carbono	0.07 % Show Material materials with Carbono of 0.07 %
Cromo	18 - 20 % Show Material materials with Cromo of 18 - 20 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	1.5 % Show Material materials with Manganeso of 1.5 %
Molibdeno	2 - 2.5 % Show Material materials with Molibdeno of 2 - 2.5 %
Níquel	9 - 12 % Show Material materials with Níquel of 9 - 12 %
Silicona	1.5 % Show Material materials with Silicona of 1.5 %