EN 10213-4 Grade GX2CrNiMoCuN25-6-3-3 solution heat-treated and quenched

Want to keep this datasheet? Save it now in your required format

Description

Material GX2CrNiMoCuN25-6-3-3 is equivalent to trademark G-X 3 CrNiMoCuN 26 63 3 acc. to SEW 410-88. The SEW-material shows higher resistance especially in the presence of non-oxidizing acids (e.g. sulfuric acid). It has increased strength properties and is unsuitable for operating temperatures above 300 °C. G-X 3 CrNiMoCuN 26 6 3 3 is used for castings for flue gas desulfurization.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.7 g/cm³ Show Material materials with Densidad of 7.7 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Duplex Stainless Steel
Elongación	20.0 °C	22 % Show Material materials with Elongación of 22 %
Límite elástico Rp 0,2	20.0 °C	480 MPa Show Material materials with Límite elástico Rp 0,2 of 480 MPa
	100.0 °C	390 MPa Show Material materials with Límite elástico Rp 0,2 of 390 MPa
	200.0 °C	330 MPa Show Material materials with Límite elástico Rp 0,2 of 330 MPa

Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Duplex Stainless Steel
Módulo elástico	23.0 °C	200 GPa Show Material materials with Módulo elástico of 200 GPa	Typical for Duplex Stainless Steel
Resistencia a la tracción	20.0 °C	650 - 850 MPa Show Material materials with Resistencia a la tracción of 650 - 850 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	450 J/(kg·K) Show Material materials with Calor específico of 450 J/(kg·K)
Coeficiente de dilatación térmica	100.0 °C	1.3E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.3E-5 1/K
	300.0 °C	1.4E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.4E-5 1/K
	Unlock all property charts
Conductividad térmica	50.0 °C	17 W/(m·K) Show Material materials with Conductividad térmica of 17 W/(m·K)
	100.0 °C	18 W/(m·K) Show Material materials with Conductividad térmica of 18 W/(m·K)
	Unlock all property charts
Temperatura de fusión		1375 - 1450 °C Show Material materials with Temperatura de fusión of 1375 - 1450 °C	Typical for Duplex Stainless Steel
Temperatura máx. de funcionamiento		300 °C Show Material materials with Temperatura máx. de funcionamiento of 300 °C	Typical for Duplex Stainless Steel

Chemical properties

Property	Value
Azufre	0.025 % Show Material materials with Azufre of 0.025 %
Carbono	0.03 % Show Material materials with Carbono of 0.03 %
Cobre	2.75 - 3.5 % Show Material materials with Cobre of 2.75 - 3.5 %
Cromo	24.5 - 26.5 % Show Material materials with Cromo of 24.5 - 26.5 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	1.5 % Show Material materials with Manganeso of 1.5 %
Molibdeno	2.5 - 3.5 % Show Material materials with Molibdeno of 2.5 - 3.5 %
Nitrógeno	0.12 - 0.22 % Show Material materials with Nitrógeno of 0.12 - 0.22 %
Níquel	5 - 7 % Show Material materials with Níquel of 5 - 7 %
Silicona	1 % Show Material materials with Silicona of 1 %