SEW 395 Grade G-X2CrNiMnMoNNb21-16-5-3 solution heat-treated and quenched

Want to keep this datasheet? Save it now in your required format

Description

The fully austenitic material G-X 2 CrNiMnMoNNb 21 16 5 3, with the material number 1.3964 according to SEW 395-87 (invalidly replaced by GX2CrNiMnMoNNb21-16-5-3, material number 1.3967 according to SEW 395-98), possesses a defined low value of the relative magnetic permeability of 1.01 maximum (for castings with a wall thickness of up to 50 mm). It is applied for construction components which an interference or shielding of a magnetic field must not occur at. In the process of cutting machining, attention has to be paid to the fact that, unlike chromium-nickel cast steel grades, manganese-alloyed grades have a tendency to a stronger strain hardening. (SEW: steel-iron material specification)

Related Standards

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

7.9 g/cm³

Show Material materials with Densidad of 7.9 g/cm³

Mecánica

PropertyTemperatureValue

Elongación

20.0 °C

20 %

Show Material materials with Elongación of 20 %

Límite elástico Rp 0,2

20.0 °C

315 MPa

Show Material materials with Límite elástico Rp 0,2 of 315 MPa

Resistencia a la tracción

20.0 °C

570 - 800 MPa

Show Material materials with Resistencia a la tracción of 570 - 800 MPa

Aplicaciones térmicas

PropertyTemperatureValue

Coeficiente de dilatación térmica

100.0 °C

1.57E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.57E-5 1/K

200.0 °C

1.7E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.7E-5 1/K

300.0 °C

1.75E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.75E-5 1/K

Conductividad térmica

20.0 °C

14 W/(m·K)

Show Material materials with Conductividad térmica of 14 W/(m·K)

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

20.0 °C

8.1E-7 Ω·m

Show Material materials with Resistividad eléctrica of 8.1E-7 Ω·m

Chemical properties

PropertyValue

Azufre

0.01 %

Show Material materials with Azufre of 0.01 %

Carbono

0.03 %

Show Material materials with Carbono of 0.03 %

Cromo

20 - 21.5 %

Show Material materials with Cromo of 20 - 21.5 %

Fósforo

0.03 %

Show Material materials with Fósforo of 0.03 %

Manganeso

4 - 6 %

Show Material materials with Manganeso of 4 - 6 %

Molibdeno

3 - 3.5 %

Show Material materials with Molibdeno of 3 - 3.5 %

Niobio

0.25 %

Show Material materials with Niobio of 0.25 %

Nitrógeno

0.2 - 0.35 %

Show Material materials with Nitrógeno of 0.2 - 0.35 %

Níquel

15 - 17 %

Show Material materials with Níquel of 15 - 17 %

Silicona

1 %

Show Material materials with Silicona of 1 %