SEW 520 Grade G14NiCrMo10-6 quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

The material G14NiCrMo10-6 is suitable for fusion welding and is considered to have a good weldability, since it has been successfully used with good results in cast welding constructions, especially in combination with rolling mill and forged products made from quenchhardened high-strength fine-grain structural steels. In addition to high values for the 0.2% proof strength, the material distinguishes itself by relatively high values of the notch impact energy at the same time. Application: is chiefly applied in the mechanical engineering and the vehicle manufacturing, furthermore in the plant engineering and crane construction, in the offshore-technology as well as in the underground mining at climatically determined temperatures.

Related Standards

SEW 520

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Densidad of 7.8 - 7.9 g/cm³	Typical for Nickel Chromium Molybdenum Steel

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.29 [-] Show Material materials with Coeficiente de Poisson of 0.29 [-]	Typical for Nickel Chromium Molybdenum Steel
Elongación	20.0 °C	16 % Show Material materials with Elongación of 16 %
Límite elástico	20.0 °C	550 MPa Show Material materials with Límite elástico of 550 MPa
Módulo elástico	23.0 °C	200 - 215 GPa Show Material materials with Módulo elástico of 200 - 215 GPa	Typical for Nickel Chromium Molybdenum Steel
Resistencia a la tracción	20.0 °C	650 - 800 MPa Show Material materials with Resistencia a la tracción of 650 - 800 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	448 - 670 J/(kg·K) Show Material materials with Calor específico of 448 - 670 J/(kg·K)	Typical for Nickel Chromium Molybdenum Steel
Coeficiente de dilatación térmica	-196.0 °C	8.6E-6 1/K Show Material materials with Coeficiente de dilatación térmica of 8.6E-6 1/K
	-170.0 °C	9.4E-6 1/K Show Material materials with Coeficiente de dilatación térmica of 9.4E-6 1/K
	-120.0 °C	1.03E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.03E-5 1/K
	-50.0 °C	1.12E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.12E-5 1/K
	-25.0 °C	1.14E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.14E-5 1/K

Conductividad térmica	-20.0 °C	35 W/(m·K) Show Material materials with Conductividad térmica of 35 W/(m·K)
Temperatura de fusión		1382 - 1529 °C Show Material materials with Temperatura de fusión of 1382 - 1529 °C	Typical for Nickel Chromium Molybdenum Steel

Chemical properties

Property	Value
Azufre	0.01 % Show Material materials with Azufre of 0.01 %
Carbono	0.12 - 0.16 % Show Material materials with Carbono of 0.12 - 0.16 %
Cromo	1.3 - 1.8 % Show Material materials with Cromo of 1.3 - 1.8 %
Fósforo	0.01 % Show Material materials with Fósforo of 0.01 %
Manganeso	0.55 - 0.7 % Show Material materials with Manganeso of 0.55 - 0.7 %
Molibdeno	0.45 - 0.55 % Show Material materials with Molibdeno of 0.45 - 0.55 %
Níquel	2.7 - 3 % Show Material materials with Níquel of 2.7 - 3 %
Silicona	0.3 % Show Material materials with Silicona of 0.3 %