EN 10025-3 Grade S355N normalized or normalized formed (+N)

View suppliers (13)
Want to keep this datasheet? Save it now in your required format

Description

The unalloyed, normalised/normalising rolled quality steel S355N is a weldable fine-grained steel with a min. yield point of 355 N/mm². The steel is applicated in normalized condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions etc. Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in normalized condition, for nominal thickness (s) up to 16 mm can be warranted the following bending radius values: longitudinal: 2,5 x s transverse: 2,0 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Requirements regarding hot dip zinc coating by arrangement.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueConditionRelated StandardsShape

Densidad

20 °C

7.83 g/cm³

Show Material materials with Densidad of 7.83 g/cm³

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Mecánica

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coeficiente de Poisson

0.29 [-]

Show Material materials with Coeficiente de Poisson of 0.29 [-]

Typical for Low Carbon Steel

Dureza Brinell

242 [-]

Show Material materials with Dureza Brinell of 242 [-]

Predicted Value, Transverse

Elongación

17.0 %

Show Material materials with Elongación of 17.0 %

Predicted Value, A80 Transverse

17.2 %

Show Material materials with Elongación of 17.2 %

Predicted Value, A80

17.8 %

Show Material materials with Elongación of 17.8 %

Predicted Value, A200

19.6 %

Show Material materials with Elongación of 19.6 %

Predicted Value, Transverse

21.1 %

Show Material materials with Elongación of 21.1 %

Predicted Value, A5

21.3 %

Show Material materials with Elongación of 21.3 %

Predicted Value, A50

20 °C

20 %

Show Material materials with Elongación of 20 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat

20 °C

21 %

Show Material materials with Elongación of 21 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

22 %

Show Material materials with Elongación of 22 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

Estricción

44.2 %

Show Material materials with Estricción of 44.2 %

Predicted Value, Transverse

51.9 %

Show Material materials with Estricción of 51.9 %

Predicted Value

Límite elástico

254.1 MPa

Show Material materials with Límite elástico of 254.1 MPa

Predicted Value, RP1

301.2 MPa

Show Material materials with Límite elástico of 301.2 MPa

Predicted Value, RP1 Transverse

359.4 MPa

Show Material materials with Límite elástico of 359.4 MPa

Predicted Value, RP02

376.5 MPa

Show Material materials with Límite elástico of 376.5 MPa

Predicted Value, Transverse

450.1 MPa

Show Material materials with Límite elástico of 450.1 MPa

Predicted Value, RP002

453.7 MPa

Show Material materials with Límite elástico of 453.7 MPa

Predicted Value, RP02 Transverse

460.8 MPa

Show Material materials with Límite elástico of 460.8 MPa

Predicted Value, RP05

20 °C

275 MPa

Show Material materials with Límite elástico of 275 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

285 MPa

Show Material materials with Límite elástico of 285 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat, Strip, Rod, Wire

20 °C

295 MPa

Show Material materials with Límite elástico of 295 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

315 MPa

Show Material materials with Límite elástico of 315 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

325 MPa

Show Material materials with Límite elástico of 325 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

335 MPa

Show Material materials with Límite elástico of 335 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

345 MPa

Show Material materials with Límite elástico of 345 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

355 MPa

Show Material materials with Límite elástico of 355 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

Módulo de cizallamiento

82 GPa

Show Material materials with Módulo de cizallamiento of 82 GPa

Typical for Low Carbon Steel

Módulo elástico

-100 °C

217 GPa

Show Material materials with Módulo elástico of 217 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

212 GPa

Show Material materials with Módulo elástico of 212 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

207 GPa

Show Material materials with Módulo elástico of 207 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

199 GPa

Show Material materials with Módulo elástico of 199 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

192 GPa

Show Material materials with Módulo elástico of 192 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

184 GPa

Show Material materials with Módulo elástico of 184 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

175 GPa

Show Material materials with Módulo elástico of 175 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

164 GPa

Show Material materials with Módulo elástico of 164 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Resistencia a la tracción

20 °C

440 - 590 MPa

Show Material materials with Resistencia a la tracción of 440 - 590 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat

20 °C

450 - 630 MPa

Show Material materials with Resistencia a la tracción of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

450 - 600 MPa

Show Material materials with Resistencia a la tracción of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

470 - 630 MPa

Show Material materials with Resistencia a la tracción of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

470 - 600 MPa

Show Material materials with Resistencia a la tracción of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

Resistencia al cizallamiento

511.9 MPa

Show Material materials with Resistencia al cizallamiento of 511.9 MPa

Predicted Value

Aplicaciones térmicas

PropertyTemperatureValueConditionRelated StandardsShapeComment

Calor específico

-100 °C

423 J/(kg·K)

Show Material materials with Calor específico of 423 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

461 J/(kg·K)

Show Material materials with Calor específico of 461 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

479 J/(kg·K)

Show Material materials with Calor específico of 479 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

499 J/(kg·K)

Show Material materials with Calor específico of 499 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

517 J/(kg·K)

Show Material materials with Calor específico of 517 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

536 J/(kg·K)

Show Material materials with Calor específico of 536 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

558 J/(kg·K)

Show Material materials with Calor específico of 558 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

587 J/(kg·K)

Show Material materials with Calor específico of 587 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Coeficiente de dilatación térmica

-100 °C

1.08e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.08e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

1.19e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.19e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

1.25e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.25e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

1.3e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.3e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

1.36e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.36e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

1.41e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.41e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

1.45e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.45e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

1.49e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.49e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Conductividad térmica

-100 °C

37.6 W/(m·K)

Show Material materials with Conductividad térmica of 37.6 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

42.2 W/(m·K)

Show Material materials with Conductividad térmica of 42.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

43.2 W/(m·K)

Show Material materials with Conductividad térmica of 43.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

42.9 W/(m·K)

Show Material materials with Conductividad térmica of 42.9 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

41.2 W/(m·K)

Show Material materials with Conductividad térmica of 41.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

39.1 W/(m·K)

Show Material materials with Conductividad térmica of 39.1 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

36.6 W/(m·K)

Show Material materials with Conductividad térmica of 36.6 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

34.1 W/(m·K)

Show Material materials with Conductividad térmica of 34.1 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Difusividad térmica

-100 °C

12.9 mm²/s

Show Material materials with Difusividad térmica of 12.9 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

11.7 mm²/s

Show Material materials with Difusividad térmica of 11.7 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

11.2 mm²/s

Show Material materials with Difusividad térmica of 11.2 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

10.3 mm²/s

Show Material materials with Difusividad térmica of 10.3 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

9.4 mm²/s

Show Material materials with Difusividad térmica of 9.4 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

8.3 mm²/s

Show Material materials with Difusividad térmica of 8.3 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

7.1 mm²/s

Show Material materials with Difusividad térmica of 7.1 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

5.7 mm²/s

Show Material materials with Difusividad térmica of 5.7 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Temperatura de fusión

1480 - 1526 °C

Show Material materials with Temperatura de fusión of 1480 - 1526 °C

Typical for Low Carbon Steel

Temperatura máx. de funcionamiento

373.3 °C

Show Material materials with Temperatura máx. de funcionamiento of 373.3 °C

Predicted Value, Long

500 °C

Show Material materials with Temperatura máx. de funcionamiento of 500 °C

Typical for Carbon Steel

Eléctrico

PropertyTemperatureValueConditionRelated StandardsShapeComment

Conductividad eléctrica

5 S/m

Show Material materials with Conductividad eléctrica of 5 S/m

Predicted Value

Resistividad eléctrica

-100 °C

1.82e-07 Ω·m

Show Material materials with Resistividad eléctrica of 1.82e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

2.47e-07 Ω·m

Show Material materials with Resistividad eléctrica of 2.47e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

2.96e-07 Ω·m

Show Material materials with Resistividad eléctrica of 2.96e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

3.68e-07 Ω·m

Show Material materials with Resistividad eléctrica of 3.68e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

4.55e-07 Ω·m

Show Material materials with Resistividad eléctrica of 4.55e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

5.56e-07 Ω·m

Show Material materials with Resistividad eléctrica of 5.56e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

6.75e-07 Ω·m

Show Material materials with Resistividad eléctrica of 6.75e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

8.13e-07 Ω·m

Show Material materials with Resistividad eléctrica of 8.13e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Magnético

PropertyValueComment

Temperatura de Curie

770 °C

Show Material materials with Temperatura de Curie of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValueConditionRelated StandardsShape

Aluminio

0.02 %

Show Material materials with Aluminio of 0.02 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Azufre

0.025 %

Show Material materials with Azufre of 0.025 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.03 %

Show Material materials with Azufre of 0.03 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Carbono

0.2 %

Show Material materials with Carbono of 0.2 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Cobre

0.35 %

Show Material materials with Cobre of 0.35 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

0.55 %

Show Material materials with Cobre of 0.55 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Cromo

0.3 %

Show Material materials with Cromo of 0.3 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Fósforo

0.03 %

Show Material materials with Fósforo of 0.03 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.035 %

Show Material materials with Fósforo of 0.035 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Manganeso

0.9 - 1.65 %

Show Material materials with Manganeso of 0.9 - 1.65 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Molibdeno

0.1 %

Show Material materials with Molibdeno of 0.1 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Niobio

0.05 %

Show Material materials with Niobio of 0.05 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Nitrógeno

0.015 %

Show Material materials with Nitrógeno of 0.015 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Níquel

0.5 %

Show Material materials with Níquel of 0.5 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Silicona

0.5 %

Show Material materials with Silicona of 0.5 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Titanio

0.03 %

Show Material materials with Titanio of 0.03 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

0.05 %

Show Material materials with Titanio of 0.05 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Vanadio

0.12 %

Show Material materials with Vanadio of 0.12 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Technological properties

Property
Supplier Disclaimer

The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.