EN 10326 Grade S250GD cold rolled

View suppliers (8)
Want to keep this datasheet? Save it now in your required format

Description

The structural steel (non-alloy high-grade steel) S250GD is deliverable with following hot-dip coatings: S250GD+Z (coating Zn), S250GD+ZF (coating Zn-Fe), S250GD+ZA (coating Zn-Al), S250GD+AZ (coating Al-Zn), S250GD+AS (coating Al-Si). The coating mass for Z amounts to 100, 140, 200, (225), 275, 350*, (450)* and (600)* g/m², for ZF to 100 and 140** g/m², for ZA to 95, 130, 185, 200, 255 and 300* g/m², for AZ it amounts to 100, 150 and 185 g/m², for AS it amounts to 60, 80, 100, (120) and (150) g/m². The parenthesis values are deliverable after arrangement the values are in each case both side minimum values (three-faced specimen). The * marked values are not deliverable for the surface types B and C and the ** marked values are not deliverable for the surface type C (see also DIN EN 10326). The advantages in opposite to the hot-dip galvanising are: - higher corrosion resistance - excellent forming behaviour - low crack susceptibility of the coating The material has a min. yield point of 250 N/mm² and is used for construction parts with high strength and high corrosion resistance. The coated steel is weldable with the usual methods. Furthermore are given the adhesive suitability and the coatability with organic materials, in each case after a previous suitable surface treatment. Application: household appliances industry, construction industry, furniture industry, electrical engineering, automotive engineering

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueComment

Densidad

7.8 - 7.9 g/cm³

Show Material materials with Densidad of 7.8 - 7.9 g/cm³

Typical for Low Carbon Steel

Mecánica

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coeficiente de Poisson

0.29 [-]

Show Material materials with Coeficiente de Poisson of 0.29 [-]

Typical for Low Carbon Steel

Dureza Brinell

240 [-]

Show Material materials with Dureza Brinell of 240 [-]

Predicted Value, Transverse

Elongación

16.5 %

Show Material materials with Elongación of 16.5 %

Predicted Value, A200

18.9 %

Show Material materials with Elongación of 18.9 %

Predicted Value, Transverse

19.4 %

Show Material materials with Elongación of 19.4 %

Predicted Value, A80 Transverse

21.6 %

Show Material materials with Elongación of 21.6 %

Predicted Value, A50

21.9 %

Show Material materials with Elongación of 21.9 %

Predicted Value

24.1 %

Show Material materials with Elongación of 24.1 %

Predicted Value, A5

20 °C

19 %

Show Material materials with Elongación of 19 %

cold rolled

EN 10326, EN 10346

Strip

A80

Estricción

39.2 %

Show Material materials with Estricción of 39.2 %

Predicted Value

43.1 %

Show Material materials with Estricción of 43.1 %

Predicted Value, Transverse

Módulo de cizallamiento

82 GPa

Show Material materials with Módulo de cizallamiento of 82 GPa

Typical for Low Carbon Steel

Módulo elástico

200 - 215 GPa

Show Material materials with Módulo elástico of 200 - 215 GPa

Typical for Low Carbon Steel

Resistencia a la tracción

20 °C

330 MPa

Show Material materials with Resistencia a la tracción of 330 MPa

cold rolled

EN 10326, EN 10346

Strip

Resistencia al cizallamiento

499.5 MPa

Show Material materials with Resistencia al cizallamiento of 499.5 MPa

Predicted Value

Aplicaciones térmicas

PropertyValueComment

Calor específico

465 J/(kg·K)

Show Material materials with Calor específico of 465 J/(kg·K)

Typical for Low Carbon Steel

Coeficiente de dilatación térmica

1.32e-05 - 1.38e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.32e-05 - 1.38e-05 1/K

Typical for Low Carbon Steel

Conductividad térmica

25 - 93 W/(m·K)

Show Material materials with Conductividad térmica of 25 - 93 W/(m·K)

Typical for Low Carbon Steel

Temperatura de fusión

1480 - 1526 °C

Show Material materials with Temperatura de fusión of 1480 - 1526 °C

Typical for Low Carbon Steel

Temperatura máx. de funcionamiento

310.4 °C

Show Material materials with Temperatura máx. de funcionamiento of 310.4 °C

Predicted Value, Long

500 °C

Show Material materials with Temperatura máx. de funcionamiento of 500 °C

Typical for Carbon Steel

Eléctrico

PropertyValueComment

Conductividad eléctrica

8 S/m

Show Material materials with Conductividad eléctrica of 8 S/m

Predicted Value

Resistividad eléctrica

1.43e-07 - 1.74e-07 Ω·m

Show Material materials with Resistividad eléctrica of 1.43e-07 - 1.74e-07 Ω·m

Typical for Carbon Steel

Magnético

PropertyValueComment

Temperatura de Curie

770 °C

Show Material materials with Temperatura de Curie of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValueConditionRelated StandardsShape

Azufre

0.045 %

Show Material materials with Azufre of 0.045 %

cold rolled

EN 10326, EN 10346

Strip

Carbono

0.2 %

Show Material materials with Carbono of 0.2 %

cold rolled

EN 10326, EN 10346

Strip

Fósforo

0.1 %

Show Material materials with Fósforo of 0.1 %

cold rolled

EN 10326, EN 10346

Strip

Manganeso

1.7 %

Show Material materials with Manganeso of 1.7 %

cold rolled

EN 10326, EN 10346

Strip

Silicona

0.6 %

Show Material materials with Silicona of 0.6 %

cold rolled

EN 10326, EN 10346

Strip