EN 10025-5 Grade S235J0W normalized or normalized formed (+N)

View suppliers (7)
Want to keep this datasheet? Save it now in your required format

Description

The weather resistant steel S235JOW with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 235 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding. The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated. Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge. With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible. The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueComment

Densidad

7.8 g/cm³

Show Material materials with Densidad of 7.8 g/cm³

Typical for Steel

Mecánica

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coeficiente de Poisson

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Steel

Elongación

18.4 %

Show Material materials with Elongación of 18.4 %

Predicted Value, A200

21.7 %

Show Material materials with Elongación of 21.7 %

Predicted Value, A5

24.6 %

Show Material materials with Elongación of 24.6 %

Predicted Value, A50

20 °C

17 %

Show Material materials with Elongación of 17 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

18 %

Show Material materials with Elongación of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

19 %

Show Material materials with Elongación of 19 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

19 %

Show Material materials with Elongación of 19 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

20 %

Show Material materials with Elongación of 20 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

21 %

Show Material materials with Elongación of 21 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

22 %

Show Material materials with Elongación of 22 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

22 %

Show Material materials with Elongación of 22 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

23 %

Show Material materials with Elongación of 23 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

24 %

Show Material materials with Elongación of 24 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

24 %

Show Material materials with Elongación of 24 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

25 %

Show Material materials with Elongación of 25 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

26 %

Show Material materials with Elongación of 26 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Límite elástico

258.2 MPa

Show Material materials with Límite elástico of 258.2 MPa

Predicted Value, RP1

285.5 MPa

Show Material materials with Límite elástico of 285.5 MPa

Predicted Value, RP1 Transverse

295.7 MPa

Show Material materials with Límite elástico of 295.7 MPa

Predicted Value, RP05

326.8 MPa

Show Material materials with Límite elástico of 326.8 MPa

Predicted Value, RP02

357.6 MPa

Show Material materials with Límite elástico of 357.6 MPa

Predicted Value, RP02 Transverse

472.4 MPa

Show Material materials with Límite elástico of 472.4 MPa

Predicted Value, RP002

20 °C

195 MPa

Show Material materials with Límite elástico of 195 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

195 MPa

Show Material materials with Límite elástico of 195 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

215 MPa

Show Material materials with Límite elástico of 215 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

215 MPa

Show Material materials with Límite elástico of 215 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

225 MPa

Show Material materials with Límite elástico of 225 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

225 MPa

Show Material materials with Límite elástico of 225 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

235 MPa

Show Material materials with Límite elástico of 235 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

235 MPa

Show Material materials with Límite elástico of 235 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Módulo elástico

190 - 210 GPa

Show Material materials with Módulo elástico of 190 - 210 GPa

Typical for Steel

Resistencia a la tracción

20 °C

340 - 510 MPa

Show Material materials with Resistencia a la tracción of 340 - 510 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

20 °C

340 - 470 MPa

Show Material materials with Resistencia a la tracción of 340 - 470 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

20 °C

350 - 510 MPa

Show Material materials with Resistencia a la tracción of 350 - 510 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

350 - 500 MPa

Show Material materials with Resistencia a la tracción of 350 - 500 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

350 - 510 MPa

Show Material materials with Resistencia a la tracción of 350 - 510 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

350 - 500 MPa

Show Material materials with Resistencia a la tracción of 350 - 500 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

360 - 510 MPa

Show Material materials with Resistencia a la tracción of 360 - 510 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

360 - 500 MPa

Show Material materials with Resistencia a la tracción of 360 - 500 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

360 - 510 MPa

Show Material materials with Resistencia a la tracción of 360 - 510 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

360 - 500 MPa

Show Material materials with Resistencia a la tracción of 360 - 500 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

360 - 470 MPa

Show Material materials with Resistencia a la tracción of 360 - 470 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Chemical properties

PropertyValueConditionRelated StandardsShape

Azufre

0.035 %

Show Material materials with Azufre of 0.035 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.04 %

Show Material materials with Azufre of 0.04 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Carbono

0.13 %

Show Material materials with Carbono of 0.13 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Cobre

0.25 - 0.55 %

Show Material materials with Cobre of 0.25 - 0.55 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Cromo

0.4 - 0.8 %

Show Material materials with Cromo of 0.4 - 0.8 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Fósforo

0.035 %

Show Material materials with Fósforo of 0.035 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.04 %

Show Material materials with Fósforo of 0.04 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Manganeso

0.2 - 0.8 %

Show Material materials with Manganeso of 0.2 - 0.8 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Nitrógeno

0.009 %

Show Material materials with Nitrógeno of 0.009 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Níquel

0.65 %

Show Material materials with Níquel of 0.65 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Silicona

0.4 %

Show Material materials with Silicona of 0.4 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar